Recent content by JJF

The FUSION has six presets, so... Preset #1: clean fish Preset #2: flush motors Preset #3: wash, rinse and dry boat Preset #4: wash, rinse and store gear Preset #5: open a beer Preset #6: play music

Seems fine to me

Hi, Just waiting for the nice weather....

I manually haul ten lobster traps. I am using a piece of rubber roof sheeting across the gunnel and transom fish box.

I can't help you with the carpet, but as an FYI... YKK makes a seld-adhesive snap fastener call SNAD... You can use them to avoid having to drill/screw the fasteners on the deck.

When I bought my 2018 306 Canyon with "C Series" F350s, I discussed it with service manager at my local GW/Yamaha dealer. He told me to avoid the "A & B Series" motors. He said the "C Series" are fine.

Got it. thx

Hi, I have my 2018 Canyon listed at $225K.

If you go the DYI route, make sure to bundle the wires (as suggested in post #4) and perhaps label them. It is VERY easy to get wires confused, miss a ground, etc. Good luck with it. I would also suggest taking a few pictures.

FYI.. I am pretty sure you can extend the warranty an additional two years.

I'd budget $25k. Are you including a VHF, radio, antennas, GPS antenna, a mount for the RADAR, autopilot? Plus, there are going to be a bunch of incidentals: cables, sealants, antenna mounts, misc. hardware, etc. It adds up pretty qickly. At the risk of spending your money, get what you want...

FYI: on my 2018 Canyon with F350s, the scuppers are well above the water. They are in the painted waterline, but out of the water.

Hi, Regarding the fuel consumption with the F350s. I have a 2018 Canyon 306 with twin F350s ("C" Series). I cruise at 30 MPH getting 1.4 MPG. (boat goes through most anything at 26-30 MPH) If I run at 47 MPH or greater, then it drops to .8 - 1 MPG. Given that you said you don't fast, fuel...

Got it.. apologies for the delay in responding..

Just an FYI, many insurance companies will only cover freeze damage if the winterization was performed by a dealer/yard, etc.