Search results

  1. F

    Dome light w/spreader switch

    I'll take it off your hands for a spare.
  2. F

    Upholstered armrests

    They look great , what was the cost?
  3. F

    2000 gulfstream windless

    I have a gulfstream 2000 with twin 150's. I installed the profish 700. I installed it as far back on pulpit as possible, leaving the anchor hatch useable. I installed a bail at the end bolted threw the roller. I never had a problem. I did install the remote with fob. If i am alone I can be on...
  4. F

    Windlass Installation 232 Gulfstream

    I mounted mine under the console. I also purchase the remote receiver with the fob. Very helpful retrieving up on the bow.
  5. F

    1999 Gulfstream 232 Fresh Water Pump Location.

    My Gulfstream is a 2000, The pump is in the stern. There are two next to each other. The right one is the salt water wash down and the left one is your fresh water pump.
  6. F

    Trailering - motors up or down?

    I use a product called m-y wedge. It is a very hard rubber cylinder with a hole in the center that goes over the ram. You raise your motor put the m-y wedge over the ram then lower the motor on to it. It keeps the motor plenty off of the ground. m-ywedge.com
  7. F

    2020 228 steering wheel

    Lewmar also makes one. I plan to add one to my steering wheel when spring finally comes.
  8. F

    Lewmar profish700 horizontal on a 2003 GW Gulfstream >> HELP !! Question ..

    I Have a 2000 Gulfstream and installed the profish 700. I installed it as far back on the pulpit to the anchor locker as I could. I has worked fine for me. I did also installed the remote and when I retrieve I watch with the locker hatch open.
  9. F

    Dock line question

    I used different colored electrical tape on the ends to separate the different pair of lines. Have to keep the wife Happy.
  10. F

    Removing driveshaft bushing (above the waterpump)

    I replaced them on my twin 150's. One was in very bad shape had a hard time removing the lower unit spline past the bushing. I used a hack saw blade and cut it in a few places. Take your time and you will be fine.
  11. F

    Marine Speaker Covers

    Let us know how the sound quality is with the covers on!
  12. F

    Twin Yam 200 HPDI on 272 issue

    Have you replaced the VST filters?
  13. F

    Grady White tool

    The fork part is for popping your snaps on your curtains. I use instead of pulling on the curtain and possibly ripping out the snap.
  14. F

    Best Windlass for Gulfstream?

    I installed the closed bail do to I had the open one and brought the anchor up to fast and it flew up in the air and almost hit my friend in the head. The bail keeps the anchor from flying up in the air .you still have the roller with the bail at the end of the pulpit. I bought the 300' 8 plait...
  15. F

    Best Windlass for Gulfstream?

    Hi, Tom I have a 2000 Gulfstream. I installed the lewmar pro fish 700. I choose the pro fish for the free fall. I also installed the remote receiver so I can use the remote fob if I want to. The installation wasn't hard at all. I have the OEM anchor roller witch had the open bail. I cut the to...
  16. F

    Shurflo fresh water wash

    I have the same Boat. I run the fresh water till it just spits. I put about 1 gal of RV antifreeze in the tank. Run the sink and shower till it runs the color of the antifreeze. You can then Take the hose unions on the pump off if you like. Here's a tip on the live bait well winterizing. There...
  17. F

    replacement/broken parts on 05 Gulfstream

    Go on Ebay [Grady White Boat Parts] The stern fresh water cap is there for sure,rubber and s.steel
  18. F

    Gulfstream Auxiliary Berth Supports - Help!

    Hi, I have 2000 Gulfstream I purchased 3 seasons ago. I had no auxiliary berth cushions. I had a marina make them for me. before I received them I found a set. The cushions I had made have never been on the boat. If you would like to buy them I give you a deal and i live in CT.