DennisG01's latest activity
-
DDennisG01 replied to the thread 1988 20ft Overnighter 204-C Fuel Tank specs.Good luck. He never responded back with any type of response to his misinformed idea of the angle of his boat being the problem and/or...
-
DDennisG01 replied to the thread 600HP Sailfish #’s.Would a single 600HP Mercury work better? :)
-
DDennisG01 replied to the thread How much Epoxy for 228 Tank Cover Repair.I want to mention right up front that I did that entirely as a "I wonder if it would work" thing. I was curious. I knew that I could...
-
DDennisG01 replied to the thread 200hr service.There's lots of different engines out there... different brands, old, new, 2-stroke, 4-stroke, etc. If you can list the checklist...
-
DDennisG01 replied to the thread Switch panel plate.Very doubtful - shopping for boat parts are nothing like shopping for car parts. But you can give them those dimensions after you measure.
-
DDennisG01 replied to the thread How much Epoxy for 228 Tank Cover Repair.To add onto what I just said... I suspect the poor results that you may have found on the internet are likely due to user error -...
-
DDennisG01 replied to the thread How much Epoxy for 228 Tank Cover Repair.I've used other brands and never had an issue. You can use polyester resin if you want to save even more money. Epoxy is easier to...
-
DDennisG01 replied to the thread How much Epoxy for 228 Tank Cover Repair.I don't know how big your hatch is, but get yourself a gallon. You won't need that much, but you'll find many uses for it in the...
-
DDennisG01 replied to the thread Switch panel plate.If you can no longer get it from your dealer (did you try?), which is possible given the age of the boat, the other option would be to...
-
DDennisG01 replied to the thread 2000 bimini 306.You might still find someone that has the same boat (or at least the same dash layout... as sometimes that changes throughout the model...
-
DDennisG01 replied to the thread Live well drain on 90 204 fiaherman.Welcome aboard! Yes, the fitting is just a standard thing with a nut. I haven't done that job on your boat, but in nearly all cases...
-
DDennisG01 replied to the thread 2000 bimini 306.Ah, OK. That makes more sense! :) So, I don't have your boat, but I'm not foreign to doing this kind of thing. So, every 12" GPS...
-
DDennisG01 replied to the thread 2000 bimini 306.Can you better explain? I'm not sure what you mean by "capacity".
-
DDennisG01 replied to the thread 2000 Bimini 306.Can you please delete this post? Just stick with your other one in the other sub-forum. Otherwise, it can get confusing for us when...
-
DDennisG01 replied to the thread Spark Plug Maintenance on Yamaha 2 Strokes.I would never trust an aftermarket manual for torque specs - although that 14 ft/lbs sounds about right from memory. I say "from...