Hookup1's latest activity

  • Hookup1
    Hookup1 replied to the thread Circuit Breaker.
    I swapped the circuit breaker out. Lugs had to be drilled out with a step bit but there was plenty of copper lug to do it. That breaker...
  • Hookup1
    Hookup1 replied to the thread Hard Top Wanted.
    Dave - You are looking for a needle in a haystack. There are no new-old-stock hardtops waiting for you. A 30 year old "used" hardtop...
    • Hardtop on.jpeg
    • Hardtop top 1.jpeg
    • Hardtop top 2.jpeg
    • Hardtop underside.jpeg
  • Hookup1
    Hookup1 replied to the thread Circuit Breaker.
    That's what I thought it was. I remember your comment about the red button breaker sucks. Voltage at the helm and overhead box is lower...
    • House terminals.jpeg
  • Hookup1
    Too lazy to figure it out but can someone tell me what this red button breaker is for? Can’t trip it. Going to replace with a better...
    • image.jpg
  • Hookup1
    Hookup1 replied to the thread Transom thru hole.
    If you want to match the holes up take the scupper flap off and look for markings. I went thru this last year on mine. It's amazing how...
  • Hookup1
    I have a Noco single-bank and a ProMariner ProSport HD three-bank. On 24x7. Duracell Marine AGM batteries from Sam's Club. Both smart...
  • Hookup1
    As you know The Gulf of America is pretty flat until you get way offshore. I looked at my charts for one of the GG members for the...
    • IMG_0051.jpeg
    • IMG_0050.jpeg
    • IMG_0049.jpeg
  • Hookup1
    Hookup1 replied to the thread 222 Tank '05.
    Drag the boat around, stir things up, get the bow up high, pull the sending unit. Using a piece of copper tubing and an automotive fuel...
  • Hookup1
    Should last indefinitely. Take it out, bleach it, agitate it and put it back. You don't really drink that water do you?
  • Hookup1
    Your time and materials are valuable. My attitude is "done right done once". Make your choice.
    • 1 Rebuilt hatch.jpeg
  • Hookup1
    Hookup1 replied to the thread Replace windows - New style.
    It's not that difficult. Windows don't open anymore. Fixed plastic windows caulked in. Probably acrylic per my glass guys. After 10...
  • Hookup1
    Hookup1 replied to the thread Switch panel plate.
    Well when you start on the panel getting a new one is relatively easy and inexpensive. You then have to look at your 20+ yo switches and...
  • Hookup1
    Hookup1 replied to the thread Switch panel plate.
    Maybe. Call them. They make switch panels for a lot of older boats. They may have the template. All you really need is a photo of...
    • Panel Front.jpeg
    • Finished Switch.jpeg
  • Hookup1
    For someone DIY stay with West System. They are an epoxy company with lots of related products. It's not really that expensive. You...
    • Hatch 3.jpeg
  • Hookup1
    Pickup a gallon of 105 epoxy resin. I used West System products from my local shop. The are two hardeners - 205 fast and 206 slow. I...