Search results

Yesterday I replaced the key switch thinking that maybe that could be the cause of the error lights but it continues the same. I start the motor and leave it working for a bit, then I shut it down. When I open the switch again, I am going to have the error lights and the motor won't start. When...

OK, I replaced the shift switch and I am still having the 3 error lights in the RPM gauge. When those lights come up, my motor just won't start, not minding what I do, it won't start. I have to let it rest like for a day so it will be back on. This is so frustrating, what is happening to my...

This is the switch I purchased online. Although it is located right at the bottom of the engine and it's a hard place to reach, I will try to replace it. Do you guys think this switch is what generates error code 28??? After replacing this switch, I will be clearing all codes hoping for my...

Hi to everyone. So what I did was to replace the whole Oil Pump but I am still having the same 3 error lights: I had my motor scanned and this is what I got: Any suggestions on what I need to do regarding these codes??? And does any of these codes has anything to do with the 3 error lights...

I took the boat to the water yesterday and I put oil into the fuel tank because the oil pump seems not to be sucking oil. I had somebody to check it and he says that the oil pump seems to be fine but there is a ground wire that is not receiving signal from the computer. That should be the cause...

I'll read about it. Thank you so much for your time and help :)

Thank you so much for replying back to me on this.... I don't recall any beeps when I start the motor at all... The oil level is fine. I opened the motor cover yesterday and I noticed that there is a small oil leak. I don't know if it is constant or it just happened once. I cleaned it and will...

I read it all but it doesn't tell you how to interpret the lights :(

You put the oil in a small tank and the motor mixes it with gasoline by itself, the oil tank is full of oil. I was thinking that the 3 lights combined mean something different that just each light by itself.

Hi there. I have a boat with a 2000 EVINRUDE 225HP and it is showing me 3 error lights on the gauge. The motor starts and runs fine but after a while, these lights come up and the motor shuts down like some sort of protection and then I have to wait for a while to start it back again because...