Search results for query: dome light

Sorry I had my last reply cut off. Fat fingers. as I was saying I had the same problem. I purchased a new dome light. Then drilled a hole in the metal trim of the light. Then installed the spreader light switch in the new light.

I had the same problem. I purchased a new dome light and drilled a hole into the side of

It's SAT & I'm just now able to sit down & reply to this - and this is equally as damn helpful; THANK YOU. Yesterday I did replace all the fuses under the helm - and like magic things started working. However - I do think the switches at the control panel are patchy. We removed the panel -...

Right on, hopefully this all helps. The fuse panel up top controlled the spreader lights and the dome light in the cockpit as well as the vhf. I’d check those connections first. I think the cabin lights were run to the panel under the steering wheel. After almost 30 years I can imagine the...

...a DVM and some time to check voltages. Really could be anything from connections, switches, wiring etc. If voltage is present at the dome light the switch could be bad. You may need a new light assembly. As for the running lights likely connections or fuse box. It may be time to replace...

Unfortunately where there is no sun there is the opportunity for mold. You have to stay on top of areas like this. Best product to clean mold I've found is Nautical One Extreme Mold Remover.] There are a lot of products out there that will work from bleach and water to commercial mold cleaners...

He has the cover off. Look at the photos above. It looks like a block was epoxyed into the base and secured from inside the electronics box.

If you are wondering how to get to the screws, the dome light cover pries off. Its tricky but a small flat head can do the job.

He got the plastic dome off. He is trying to drop the dome light assembly. Mine was the same as yours but his is probably screwed in from inside the electronics box.

It's been a few years since I removed that light on my previous Grady, but I seem to remember working a small thin screwdriver under the edge of that round plastic piece that holds the bulbs. It just pops out. Once that was worked out of there, you will see two screws holding the main fixture...

What "two small mounting screws"? Inside the electronics box or inside the dome light? You can try a thin paint scraper and work the black gasket edge. Shouldn't be much holding it up.

The two screws inside the fixture are they bolted inside the electronics. Mine are Philips head inside the box and nuts inside the dome light. Your's look different. I don’t see the nuts in the dome light. Maybe screws inside the overhead box? Check there where the wires come thru. I’ll bet...

Hookup, how did you remove the dome light from the ceiling? I can't figure out how to remove the fixture. My spreaders have stopped working and I think it may be the switch. Previously, they worked intermittently. I'm going to check the wiring, but am curious as to how to remove the light...

The Marinco/Guest new old stock dome light I found online came in. Same mold. Quick rework to install switches and red lamp. Done!

Original light was a Guest. Marino bought them but have since discontinued making dome light. I found a Marino Guest dome light single color no switch. They appear to use the exact same base with a different lens. I ordered one today. I'll move my red lamp and switches over. I'll post results...

Sounds like a good solution, I am facing the same issue with my dome light, it looks like crap and works when it feels like it. :)

When you accidently post your message before you are finished with it, you can just click on "Edit" at the bottom of your abbreviated message and complete it without having to retype everything.

Sorry my message got submitted before I was done…. I purchased a dome light with the red/ white switch. Removed the spreader switch from my old dome light. Drilled a hold in the new dome light installed the spreader switch. Works great.

I had the same problem with my light an my 1999Sailfish. I purchased a dome light with the red/ white light. Removed the spr

How about one of these? https://www.greatlakesskipper.com/perko-boat-dome-light-1253dp1wht-tracker-marine-12v-ivory-4-inch https://www.greatlakesskipper.com/perko-boat-dome-light-300-002chr-surface-mount-6-inch-silver-12v If you are talking about the one like was on the older Gradys with the...