Search results

  1. Ekea

    Chase Propping

    I am looking at a Chase with twin F250s. there are a couple engine / fuel issues that are being taken care of (did not hit speed or rpm on sea trial). That being said, the props on it are marked 23-M. Is this boat over propped? the yamaha bulletin for the same boat with 225s has a 19 pitch...
  2. Ekea

    Cost to replace the eisenglass on my cockpit enclosure?

    this thread is 2 years old...
  3. Ekea

    2000 Grady 272 Sailfish - Listing to Starboard

    water tank? also, does the boat have foam for buoyancy? could it be waterlogged?
  4. Ekea

    Here’s how we roll in the U.K. …

    i would guess its moored and the picture is from another boat, not a dock
  5. Ekea

    Any 283 Release owners out there

    how do you plan to install the backrests? any links?
  6. Ekea

    restoration pics.

    nice work. i look forward to seeing the final product
  7. Ekea

    Tampa Area Surveyor & Yami tech

    also, if your current boat is a 2011 275, i dont think we are looking at the same boat, haha. the one i am looking at is a bit older.
  8. Ekea

    Tampa Area Surveyor & Yami tech

    i am using Atlantic Seaboard Marine Surveyors. He came very highly recommended my my local (Delaware) Grady dealer (Taylor Marine). He is ironically local to Delaware and the Seminole/Tampa area. he is a bit pricey at $27 a foot, but i have learned to not always go with the lowest bidder and...
  9. Ekea

    Tampa Area Surveyor & Yami tech

    we are under contract. engine inspection is supposed to happen today and full survey next week
  10. Ekea

    Battery location Freedom 235 and how to charge it.

    this is important. OP, as captain of the boat, you are responsible for the safety of everybody on board. there are basic things you should know. battery locations, through hull locations, seacock locations, bilge pump locations, basic wire routing, fire extinguisher locations, etc... it...
  11. Ekea

    transom deck scuppers

    there are some models that just tend to sit low in the rear even if dry and not fully loaded. the Chase sits low in the rear, many with the through hulls at or even below the water line
  12. Ekea

    Transom Issue??

    list price for the boat is mid $50k
  13. Ekea

    Transom Issue??

    thanks. a survey is definitely a prerequisite for purchase. i am just wondering if this is a walk away even before a survey.
  14. Ekea

    Transom Issue??

    im looking a chase on line and just got extra pics from the dealer. i am not sure if i should be concerned with this pic. is this a failing transom?
  15. Ekea

    Tampa Area Surveyor & Yami tech

    Im looking at a used grady in Seminole FL, 33772. I want to get it surveyed and have a tech look at the 250 4s motors. Any recommendations for local outfits? thanks!!
  16. Ekea

    330 transom rot

    3-5' alone doesn't really mean anything. 3-5 at what period? 3-5 at 15 seconds i will do in my kayak. 3-5' at 3-5 sec and it will be an unpleasant day. the boat should handle it, but no fun depending on how wet the transom is, the repair may be a full replacement. remove motors, cut the...
  17. Ekea

    263 vs 273

    thanks. i am realizing that between a dry hull, 4 strokes, and budget, i may only get two of the three. budget and dry hull are the top priorities. i will have to look at the rear deck layout of the two, i appreciate that insight!
  18. Ekea

    New to me boat

    at this point, i think you need a professional evaluation. hopefully the damaged area is limited to what you have already found and can be repaired somewhat inexpensively. this is why you should always get a full survey before you purchase a boat.
  19. Ekea

    263 vs 273

    thanks brdawg. i definitely appreciate your offer and will keep that in mind. what can yo fit in the flip up? i assume two 12" would be too big? maybe a 9" and a 12" or two 9" screens? i really hope to find one with 4 strokes for a somewhat reasonable price, but know that will be tough in...
  20. Ekea

    263 vs 273

    thanks. and a marine surveyor as well as a certified engine tech are both in the plans.