Search results

  1. G

    Fuel Primer pump

    Appreciate all the replies. Pulled the pumps out today and they were dirty. Sealed units so could not examine the inside. I had boat out this weekend and could only get 1500 rpms out of both motors. 20 miles out and limped back about 8 mph. I also pulled the fuel/water separator filters...
  2. G

    Fuel Primer pump

    I have a 1996 272 Sailfish with twin 200 Yammies. I purchased for original owner. Have had the boat for 3 years and no issues. He mentioned that he once had to replace the primer pump and recommended that if they give me trouble again to disconnect and remove and install primer bulbs. Has...
  3. G

    1996 Sailfish 272 bunks

    Lift was finished today and want to provide some feedback. Bunks were set at 90 degree angle, 26" on center. Resulting in approx 8 inches from center keel port and strbd. I called GW again to double check their original recommendation of 22" in center spacing and they told me depending on...
  4. G

    1996 Sailfish 272 bunks

    Just purchased a very nice 1996 Saifish 272. I am having a new lift installed and contacted customer support at Grady White to query the recommended spacing of the bunks. They quickly sent me back a diagram of where to position boat on the 12' length bunks. I am using a 4 post 16K Boat Lift...