Search results

Yes, it's normal to see the flywheel (from the right angle). Your boat originally had a V6 or V8 - those (currently) unused motor mounts on either side of the engine are for a V6/V8. So it looks like there is an adapter kit to use the 4-cylinder. That A-frame part is the correct piece for a...

Generally speaking, sure, more power is nice. But this isn't really about "generally". It's about what matters to you - not me, not anyone else. If you're happy with the performance (use of the trim tabs, by the way, can easily make up for less engine power) then keep it. Upgrading to more...

You might need to change the whole thing... maybe with a pullout shower, instead? Scandvik, for example, is one company that makes these. You can easily build a box, though: https://www.homedepot.com/p/Veranda-HP-1-2-in-x-12-in-x-8-ft-Reversible-Cellular-PVC-Fascia-H120WWS2/203733425

From what I know about this subject ;) piping does not add or subtract durability. It's simply a different way of making a seam. Actually, maybe it's not as durable as there's usually only one line of stitching on the underside...

All new boats do NOT suffer from that problem. However, if that filter was installed incorrectly it may be full of fuel (essentially a clog) or if the system was grossly overfilled the canister may be full of fuel for that reason, too. This charcoal "EPA" system (it's part of the mandated...

Sounds like you replaced them already, but those have plenty of life in them. I replace when they're about half gone. There's really no benefit to replacing them early, other than "it feels good" - which certainly has some merit. Either put those back on and save the new ones for when they're...

Generally speaking, I would agree. And it's really not something I would highly recommend, either. But I looked at this as a "fun experiment". It's quick and easy enough to redo, should it fail. But so far, after 5 or so years, it's still rock solid. The reality is that the core's main job...

Has anyone ever compared/looked up the weight of up a GOOD hatch with a wood core compared to foam? Meaning, comparing the weight of a hatch that is in need of repair is not fair as it would be water logged. I always the difference was only about 5 pounds, or so?

Could be a couple things going on, here. -- There could have been a malfunctioning bilge pump for a long enough time to let enough water to gather in the bilge. -- The bracket could definitely, as mentioned a number of times, have water in it. Whether it's from the access plate or the...

That's an equalizer setup - it constantly moves/rotate to help keep loads... well... "equal" between the two axles. Take it for a short trip and see if it equals out. But if the ground you are currently on isn't level, it's basically just doing it's job. If the the older spring isn't up to...

Did both gauges stop working at the same time?

Put a straight edge across the prop hub and compare one side to the other. A 3' piece of straight 2x should do the trick. Or anything that's nice and straight.

I don't like taking that chance with mine, either. Dust/dirt/debris kicking up... how much it actually hurts it, I suppose, is a big variable. But it can't be better for it, you know? Sound like you just need to clean the tracks and the spine. Treat it with some silicone spray. I don't...

Ah, you're right. I guess I misspoke... must have been Corona, not Budweiser :)

What in sam hill are you saying? I think Bloodweiser has been drinking a few too many Budweiser's! It's called "proofreading"! :) I generally agree with the others that you can probably find something newer for the same amount. But, maybe these two boats are, as mentioned, in pristine...

What about just looking at the pictures on Grady's site of boats - say something like the 275 Freedom? Or can you go look at the boats in person at a local dealer? I wonder how "perfect" the anchor roller would have to match your bow keel? Maybe make a quick mockup of that area of your boat...

I just went to Windline's website and it only said "performing scheduled maintenance". The only closure notice was over Christmas. But, they might be currently closed due to Covid. If Grady told you to contact them, I would stick with that. After all, Grady is the best source for that info...

That rusting (minor, as others have said) is typically due to crevice corrosion. SS will self-protect itself from corroding, but only if it has an adequate air supply. This is why SS is not allowed below the waterline, in favor of the more durable bronze. You can Google for crevice corrosion...

Divinycel, Coosa... nice products but expensive. Weight savings is negligible, given the square footage of the hatch compared to weight of the boat. 3/8" might be fine... but go with 1/2" - you're only talking a couple bucks here - not the place to cheap out. And, again, weight is...

Is there a part of the pickup tube inside the elbow? Look into the hole and/or reach into the hole with a thin wire - you should easily be able to feel if the tube is part of the tank. The answers to those questions will tell you. Like Skunk said, there's a cheat sheet at HD. Or just compare...