Search results

I have many pictures of my GW 232 but none on the water fishing. Trying to find something as close as my boat (hardtop, twin Yamaha's) that I can use for a logo on custom shirts for me and my boys for Christmas. Anyone have anything to share with a view from another boat or drone? Scanned web...

Try Ocean Breeze Marine Accessories out of Florida. 352-606-8999 or oceanbreezeMarieaccessories.com as they did great job on my rear transom hatch doors. I have more to don on my 232 and they will be my first call - great prices to go along with the workmanship.

Note the exterior frame is 13” square.

My interior cut size was 11” square. The standard hatch cutout was 11.25” square so they customized the opening to match the hole size. Make sense?

Nice job!

Ended up locating a custom shop in Florida, Ocean Breeze Marine Accessories, that made a small change to a standard build for the cut size as was 1/4” too large. Price was $100 less than another shop for each and delivery was within nine days. Installed the rear hatches in thirty minutes this...

I was thinking of using two pieces of Starboard with a thin piece for the front facade and slightly thicker for the section within the back wall with the door. Going to screw the two pieces together. Note I do have the equipment but never considered my self an expert as always room to learn.

I had a quote of over a grand for my 232. Couldn’t pull the trigger no matter how much my wife says to get it replaced.

I have a 2000 and need both the starboard and port sides. Was thinking of reusing the existing door and building the frame using Starboard. There is little room if any to go any bigger than current size..

Yes I recognized the one I cut this morning and concentrated on switch. Back together and working like new.

Took the bilge switch out and discovered the pin was broken on the left side of the float causing it to catch. Probably broken for some time But replaced with new and redid all connections in the bilge area (last ones from when I purchased two years ago. Real pain to put back in due to my size...

Cleaned around it and don’t see or feel anything restricting

Got out to the boat and both batteries down where turning key was nothing. Charged back up and heard small noise coming from bilge. Appears the bilge pump might have drained batteries down. Disconnected pump wire and it of course stopped. Question is whether the pump or switch is most likely the...

Just went through this and found this to be super helpful. I printed it out and taped it to where I could see it easily and started from the top gauges down. Had one loose connection I had to find on starboard tach otherwise every thing worked.

Interesting conversation. I learned a lot for a 62 year old man!

Many camping rigs use anti sway bar hitches. Why not boat trailers?

I need to name mine and have been playing with sizes. I am leaning to 10” going on both sides.

Which one’s are you ordering as looked at some there as well?

Has anyone swapped out rear panel hatches on a 232 with larger hatches? I ask as my 2000 has square 13x13 flush mount doors to get to battery and fuel tank switches but can’t find them anywhere so thought the 13 width might be ok but just go up some. Not sure how much work it might be.