Search results

Ok, here you go! Trailer Aide...

Based on your testimonial and many others, I went with the GY Endurance since I have had enough of blowouts and tire changes. My tire change method is now a perfect science and last time was able to change out in about 8 minutes give or take. No jack, no wrenches. Hardest part is finding a spot...

In my case, I have the surge brakes on a 12K trailer and with Kodiak brakes. It has very strong brakes. The original problem I had was the Excursion factory brakes were not even sufficient enough just for the truck. Now it is sufficient alone and that is an immense difference with the trailer...

I moved from the factory tires on my new trailer to the GY Endurance and hoping for the best luck with them like others that have had them longer are saying they are excellent! I had great success with Maxxis over the years. Never a blowout or failure. By the way I am very anal about the...

I have the 92 252G model. She is very heavy when fully fueled, water and gear. My estimated weight is just under the 10K mark with trailer. I use a Ford Excursion which is a 3/4 ton truck with the V10. It pulls it no problem and will maintain 70ish on the interstate in NC mostly on flat or...

Any performance numbers for this setup?

They show still in business and working on google. I will be moving close to them in the next months and expect to visit them to get my canvas refreshed.

Anyone know of a good prop shop around MHC area? I see that Bulls is no longer in the business.

I have that same boat year and model. It is a full transom with the Springfield bracket bolted on. Safest setup and lots of room in the cockpit! I love this model and it is worth someone grabbing and restoring. A bit confused on the motor comments. What year and what size is of great curiosity...

I have the Ongaro mini compact twin horns which are quite loud when new, but finding even after a couple seasons, they do start to oxidize inside and have to be cleaned and adjusted. Last one I replaced, after pulling it off I decided to take it completely apart and found that the channels were...

I have the FELL system and it works fine. Install was simple and compatible with my twin engines. Did have issues with antenna reaching to front and back through the cabin I guess, so got an extended antenna and mounted on top of my helm. I do have issues though when standing at the back of the...

Mine had big chunks out of it and cracks. I ground them out to clean material, filled with structural filler, faired and gel coated the first time. About 2 years later, I decided to put a new top mounted bow roller to accomodate better anchor flipping so it would right itself. Had to fill in...

Know what you mean by the weather! Looking forward to the results! How long were those Merc's on order?

For my manual pump system, I have to rebuild it every few years. Have replaced it twice in last 10 years. Seems the electric you had was holding up longer and much easier to use. But, the price!

Emerin1, please keep us posted as I am considering those same motors. I also have those same props...17m/17ml. For my 200 HPDI's, these are propped perfectly as I get 49mph top end if not too overloaded and the hole shot it nothing less than stellar! I would think those motors propped right...

Have gone through the same issue on my Sailfish. Ended up purchasing some cone shaped wool attachments for drill and used that to get by, but I really like the looks and size of that Proxxon. I think I might go for that one and give it a try. Thanks for sharing that Wild Blue!

amf282, any feedback on performance results with the 2 36v batteries? Anything you would do different or need to consider?

I like the teak look with black stripes, but wouldn't think it would be too hot in full sun, but I am sure it would be hotter than the grady off white gelcoat.. However, we notice a lot of glare when trolling and think that if we went with the teak, it would reduce a lot of glare off the floor...

In my 252G, I removed the factory installed raytheon tducer and cut the hole bigger to fit and it was a good install. Just had to cut some of the bilge floor away on the inside so I could access the nut to tighten.

Is it the color that is the too hot problem? No one seems to be telling what color they have when it is too hot? Would assume darker colors are hotter of course....