Does anyone know the LOA of a 2006 Grady White 225 with Yamaha 250? I'm trying to get rack space reserved at the marina but haven't taken delivery of the boat yet.
Look in the owner's manual - you can download it. Then add for the motor - you can probably find those specs online, too - or just add 3' - that will be close enough. You shouldn't need anything "down to the inch" here.
Our 2015 should be similar if engine is installed on aluminum bracket about 3’ behind transom. I measured from tip of bow to tip of prop blade with engine trimmed up was 27’ 9”. So basically a bit over 5’ beyond the spec sheet.