2008 33 express -electric panel

Hollandjr

New Member
Joined
Jan 29, 2018
Messages
2
Reaction score
2
Points
3
When I flip the switch in the dc panel to power the helm electronics box the fresh water pump runs. Even when freshwater switch off, this is the only switch this happens with. Anybody else seen this? Just started happening
 

DennisG01

GreatGrady Captain
Joined
Sep 1, 2013
Messages
7,189
Reaction score
1,341
Points
113
Location
Allentown, PA & Friendship, ME
Model
Offshore
Since it just started happening, it sounds like the switch failed in the on postion. Weird as they would normally fail in the off position. But, since as you said, it just started happening, that seems like the only answer.
 

wspitler

GreatGrady Captain
Joined
May 16, 2011
Messages
1,365
Reaction score
318
Points
83
Location
Inglis, FL
Model
Express 330
Are you sure it is the FW pump? If it's the washdown pump, then the washdown switch on the helm panel is on. Troubleshoot by turning off all DC switches except the master and then turn on the FW switch and open a tap. If it happens with the helm panel switch, then someone has added wires to that panel or there is a short in the back of the main electronics panel in the cabin. Not likely. Check all the switches, particularly the washdown and baitwell switches on the helm panel.
 

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,029
Reaction score
1,286
Points
113
quick way to tell is open a fw spicket and see if it comes out. i think a stuck breaker on while possible isn't as likely as something else.
 

DennisG01

GreatGrady Captain
Joined
Sep 1, 2013
Messages
7,189
Reaction score
1,341
Points
113
Location
Allentown, PA & Friendship, ME
Model
Offshore
I guess we should never ASSUME that a boat owner knows the difference (or how to check!) between raw water and fresh water... ;)

But... if you checked every switch as you said you did to make sure they're off, how was the washdown switch still on?
 

cbunas

New Member
Joined
Jun 29, 2016
Messages
3
Reaction score
4
Points
1
My shower sump pump failed in the open position. Was always running when DC breaker was on. Replaced the float switch (Rule $40) and its fixed. Maybe not exactly related but switches definitely fail in open or closed position.