anchor roller swap

[Fixit]

im looking to swap my bow rollers from the classic over the front, to the through the middle of the pulpit style.

wondering if anyone has a lead on Gradys bow roller they used?

looks like this one, found on the 232, some 282's and the marlin 300... probably others too. im looking to save a foot on my LOA to save on moorage

same thing as the post below

Finally Installed The Bow Pulpit With A Few Mods.

Finally found time to install the new bow pulpit on my 228. The pulpit is for a 228 ( made of coosa board these days) but I took it to a fibreglass shop to get a slot cut to take a 232 thru-pulpit bow roller and fill the groove where the 228 bow roller goes. Very happy with the job they did...

www.greatgrady.com

 

[Captseahook]

https://butlermarine.com/anchor-rollers-and-accessories/ FS2 ROLLER , Did this project on my 272 with windlass ,Worked out great. Butler was great to work with.

 

[Fixit]

https://butlermarine.com/anchor-rollers-and-accessories/ FS2 ROLLER , Did this project on my 272 with windlass ,Worked out great. Butler was great to work with.

doesn't look like the oem Grady one. do you have any picts of your swap?

 

[Captseahook]

Hope these help

 

[Fixit]

thanks for the picts but im looking for the OEM one with the rounded front

 

[Fishtales]

I'd call GW Cust Service and see if they can give you some info on the supplier.