Cushions

HuskerBoater

Member
Joined
Jul 4, 2008
Messages
22
Reaction score
0
Points
0
Hi all. I need some help. I have an '06 205. What is the best product for cleaning but more importantly protecting my bow and seat cushions? After winter storage, there is some mildew build up. I scrubbed it with soap and water but there is still some staining. What do you all use to clean and then protect your vinyl cushions? Thanks.
 

jaydub

Well-Known Member
Joined
Jul 30, 2006
Messages
147
Reaction score
0
Points
16
Location
Florida
I use 303 Aerospace protectant on the cushions. If I have a few stubborn spots or mold I scrub the spots with marine Spray Nine, rinse, then a coat of 303.
 

HuskerBoater

Member
Joined
Jul 4, 2008
Messages
22
Reaction score
0
Points
0
Hmmm...magic eraser did not work. I'll try Tilex. I guess I need something with bleach.
 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,593
Reaction score
1,447
Points
113
Location
NYC
Somewhere on another forum, a boater commented about a mildew remover he got at Wallmart. he said it was the best product he found for his boat cushions. I don't think it was marine specific)
Worth a try I guess.
I've had some luck with SoftScrub with Bleach.

After cleaning, I apply Aerospace 303 protectorant also.
 

CJBROWN

GreatGrady Captain
Joined
Aug 31, 2006
Messages
894
Reaction score
1
Points
0
Location
Orange County, CA
+1 on 303 Protectant. Never found anything else like it. I used it everything plastic, vinyl, or rubber. Even works on fiberglass.

Be careful with bleach products, it can remove the outer layer of the vinyl surface which permanently damages it.