- Joined
- Jan 31, 2005
- Messages
- 7,981
- Reaction score
- 1,272
- Points
- 113
I have 3 of these on the Marlin. One for the helm chair drain should water get in, one on the inside of the raised help step shallow hatch and one on the outside of the aft side to let the water out of the one that is inside the shallow hatch. Over the years the front cap piece broke off them. You can use the smaller length ones for 2 of the 3 locations.
I found them at Gemulex. They sell 2 lengths. Not sure if these are used on other models but they are hard to find if so.
I found them at Gemulex. They sell 2 lengths. Not sure if these are used on other models but they are hard to find if so.
