Selling my 2000 Sailfish 272 with twin Yamaha OX66 225’s approximately 900 hours. Will be used weekly until sale.
Setup and rigged for fishing, 3 swivel rod holders, 2 0 degree and 1 15 degree. 18’ taco telescoping outriggers. Has full set of cushions including stern bench seat and bow cushions (any unused cushions stored in dry/dehumidified basement year round)
Electronics:
Furuno first watch wireless radar
Furuno 1971 (no chart card currently)
Furuno 1871 with CMAP chart card and connected to b75 through hull transducer NMEA 2K backbone
2 VHFs 1 ICOM, 1 1993 Raymarine (can swap out for GX2200 for AIS receive to the furunos)
Windlass
Air Conditioning
A/C Battery charger through shore power (batteries charge and AC can run on Honda 2200)
updates:
2024:
2 new group 27 house batteries
1 new group 24 starting battery (other start battery replaced in 2023)
Replaced bow spot light and wire running to it
$8k of electrical work cleaning up, replacing any wires that needed replacing, removal of old wires
Furuno 1971F
Engines: 1 new lower unit, all on board fuel filters replaced with new hoses, miscellaneous fixes/cleanup another $8k total spent ensuring they run perfect in addition to standard maintenance
2023:
replaced poppet valves and thermostats
Water pumps and impellers
$4k electrical work/cleanup and replacement of old and installation of additional cockpit spreader lights and light bar for night fishing
2022:
Rebuilt trim/tilt units from 5 star marine
Much more to list just can’t think of right now.
Have survey from 2021 purchase in hand. Boats a 9/10 functional, currently a 6/10 cosmetic. canvas and cushions all 9.5/10. Based on 2021 survey and my look every year only soft section on the boat is the live well lid, transom and everything else in good shape.
needs: needs cockpit bolster on one side recovered. Could use a good detail, waxed before put into water. Live well lid is soft and could be recored, replaced original handle so just need to get to the finish work
Setup and rigged for fishing, 3 swivel rod holders, 2 0 degree and 1 15 degree. 18’ taco telescoping outriggers. Has full set of cushions including stern bench seat and bow cushions (any unused cushions stored in dry/dehumidified basement year round)
Electronics:
Furuno first watch wireless radar
Furuno 1971 (no chart card currently)
Furuno 1871 with CMAP chart card and connected to b75 through hull transducer NMEA 2K backbone
2 VHFs 1 ICOM, 1 1993 Raymarine (can swap out for GX2200 for AIS receive to the furunos)
Windlass
Air Conditioning
A/C Battery charger through shore power (batteries charge and AC can run on Honda 2200)
updates:
2024:
2 new group 27 house batteries
1 new group 24 starting battery (other start battery replaced in 2023)
Replaced bow spot light and wire running to it
$8k of electrical work cleaning up, replacing any wires that needed replacing, removal of old wires
Furuno 1971F
Engines: 1 new lower unit, all on board fuel filters replaced with new hoses, miscellaneous fixes/cleanup another $8k total spent ensuring they run perfect in addition to standard maintenance
2023:
replaced poppet valves and thermostats
Water pumps and impellers
$4k electrical work/cleanup and replacement of old and installation of additional cockpit spreader lights and light bar for night fishing
2022:
Rebuilt trim/tilt units from 5 star marine
Much more to list just can’t think of right now.
Have survey from 2021 purchase in hand. Boats a 9/10 functional, currently a 6/10 cosmetic. canvas and cushions all 9.5/10. Based on 2021 survey and my look every year only soft section on the boat is the live well lid, transom and everything else in good shape.
needs: needs cockpit bolster on one side recovered. Could use a good detail, waxed before put into water. Live well lid is soft and could be recored, replaced original handle so just need to get to the finish work
Attachments
-
IMG_6041.jpeg -
IMG_6039.jpeg -
IMG_4847.jpeg -
IMG_4750.jpeg -
IMG_6515.jpeg -
IMG_4621.jpeg -
IMG_6028.jpeg
Last edited:
