Grady Drive Question

Chuck_NJ

Active Member
Joined
May 16, 2020
Messages
34
Reaction score
9
Points
8
Location
North Jersey
Model
Offshore
Last year when I pulled boat out of water I noticed water coming out what appeared to be a hole rotted through my bracket. The bracket has a styrofoam block in for flotation and I thought was sealed to keep water out. After removing bottom paint from btracket I see there is a matching hole on the other side of bracket. Its clear now these were intentionally put there but are they drains? They were painted over so I never noticed them.IMG_1154 Small 2.jpeg
 
I'll let you know in a few hours. Have to swing by the boat after work today. I don't think mine has those holes. Only reason.... It had water in the bracket that did not drain until I pulled the plug.
 
I'll let you know in a few hours. Have to swing by the boat after work today. I don't think mine has those holes. Only reason.... It had water in the bracket that did not drain until I pulled the plug.
Thanks
 
Didnt make it yesterday. Change of plans. Ill stop by this afternoon.
 
You're missing an anode. Thats what goes into those bolt holes. Took me a min to figure it out. Couldn't find the holes.