Help with Garman Sonar

[reel chaos]

My Garmin wont display the depth, but it does appear to be marking fish? What do I need to look for to correct? Wiring issue? Does anyone know where on the Canyon 336 that the transducer is located?
Thank you
Read that our transducer is in hull and we need to reset the sonar settings. Will try that in the am.

 

[Hookup1]

Well let's start from the beginning and get the basic stuff down first. What model Garmin unit(s) do you have? What transducer is installed? You need to find the transducer and see what the tag says.

It's highly unlikely a wiring issue. Probably need to adjust.

 

[Fishermanbb]

If it is a late model Garmin display it should say the transducer model in the bottom left corner of the screen when on the sonar page. Also, check your settings and make sure you have it set to display depth in all modes.

 

[SkunkBoat]

By "display depth" do you mean display the depth as a number on all of your screens or do you mean you don't see bottom on the sonar screen?