Hull design

SouthShoreBoater

New Member
Joined
Apr 22, 2020
Messages
2
Reaction score
0
Points
1
Age
38
Model
Seafarer
Hoping you guys could educated me here a bit. Im looking at a 1996 Grady Voyager which appears to be a solid boat. I recently looked at a earlier 90's Seafarer and discovered some transom cracks, which turned me off from the purchase. I was told these boat has some rot issues. Does this 1996 Voyager have this same construction as the 1993 Seafarer?
 

igblack87

Well-Known Member
Joined
Oct 21, 2012
Messages
291
Reaction score
46
Points
28
Model
Fisherman 222
Hoping you guys could educated me here a bit. Im looking at a 1996 Grady Voyager which appears to be a solid boat. I recently looked at a earlier 90's Seafarer and discovered some transom cracks, which turned me off from the purchase. I was told these boat has some rot issues. Does this 1996 Voyager have this same construction as the 1993 Seafarer?
Get a Marine Survey!!
 

SouthShoreBoater

New Member
Joined
Apr 22, 2020
Messages
2
Reaction score
0
Points
1
Age
38
Model
Seafarer
I do have a surveyor for when I find the right boat. Im curious if they changed anything from the early 90's to mid. Thanks in advance
 

DennisG01

GreatGrady Captain
Joined
Sep 1, 2013
Messages
7,189
Reaction score
1,341
Points
113
Location
Allentown, PA & Friendship, ME
Model
Offshore
Pretty much all boats like what you are looking at are going to have the possibility of rot as the construction is all similar. But that's not to say that they will. Also, just having some cracks doesn't necessarily mean anything - it could just be aesthetic... or it could be more.

It's important to know that if a person is saying "these" boats have rot issues, they're kinda speaking without thinking. There's just too many variables to make a blanket statement, like that. It all comes down to condition and maintenance.
 

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,029
Reaction score
1,286
Points
113
I'd say for the most part, construction methods and materials will be the same. Boats are largely made by hand, so variation in build can occur. GW has solid quality controls but things can happen.
 

Parthery

GreatGrady Captain
Joined
Jan 31, 2005
Messages
2,589
Reaction score
220
Points
63
Location
Atlanta, GA
The 248 Voyager became the 258 Journey. For two reasons:

-Someone had an issue with GW using the name Voyager as it was trademarked. I want to say it was Chrysler but I don't think that's correct because who would confuse a GW boat with a minivan?

-The 248 hull had tucked in trim tabs and was notorious for wanting to squat, which led to some quirky handling characteristics. GW lengthened the boat a bit and it smoothed out the ride.

As others have said, a survey is important.