Kicker prop changes for troll speed

dpcarson

Member
Joined
Mar 24, 2013
Messages
12
Reaction score
0
Points
0
OK Guys. I know there are a lot of kicker posts on here and I have been reading for a while but have not seen anybody posting experience with kicker prop changes to increase speed.

I have a 9.9 johnson kicker on my a 242. About the max troll speed I can get is around 5.1-5.3 I really would like to get speed built up to about 6.5 to 7 to keep the blues of the line and get the mackerel hitting. I read on THT from one buy about an upgrade to a 4 blade 5 pitch solas pushing his 24 grady up to 7. Anybody else got any other experience with this. I thought about tilting the outboard to reduce drag but my main is what I use for steering. No steering connection for the kicker.

Any experience building speed on the kickers??
 

Willy-C

Well-Known Member
Joined
Nov 5, 2012
Messages
189
Reaction score
66
Points
28
Age
68
Location
Hooksett, NH
I'm all ears too on this.....I saw the same post regarding changing props on THT :hmm
 

dpcarson

Member
Joined
Mar 24, 2013
Messages
12
Reaction score
0
Points
0
Willy, I am surprised nobody has chimed in on this yet.
 

SmokyMtnGrady

Well-Known Member
Joined
Jul 11, 2009
Messages
2,020
Reaction score
504
Points
113
DPc Carson, just curious as to why you use a kicker to troll? Perhaps you have an older boat with a 2 stroke that is I am curious more than else? I suspect increasing the prop to 4 blades could improve performance assuming one gets more thrust out of it. I am tropical water troller and I honestly can not recall seeing anybody in a long while using a kicker to troll. Perhaps this is why folks are not responding to this question? I have seen folks on the big lakes around here troll with a kicker for stripers though.
 

Pay2Play

Well-Known Member
Joined
Jul 23, 2011
Messages
55
Reaction score
0
Points
0
Location
NE Ohio
I run a yamaha 9.9 hi thrust kicker on my 208. One of my props is 11.5 X 9.25, I can get 7 knots easy.
I don't run this one much as I troll for walleye and need the slower troll so I have one smaller diameter and pitch. I would suggest larger diameter and more pitch in a 3 blade.
 

dpcarson

Member
Joined
Mar 24, 2013
Messages
12
Reaction score
0
Points
0
SmokyMtnGrady said:
DPc Carson, just curious as to why you use a kicker to troll? Perhaps you have an older boat with a 2 stroke that is I am curious more than else? I suspect increasing the prop to 4 blades could improve performance assuming one gets more thrust out of it. I am tropical water troller and I honestly can not recall seeing anybody in a long while using a kicker to troll. Perhaps this is why folks are not responding to this question? I have seen folks on the big lakes around here troll with a kicker for stripers though.


I run a 225 2 stroke on my boat. I use the kicker because of the fuel consumption difference. If I troll on my main at low rpms my fuel consumption 3 to 4 times what the kicker is with the throttle opened pretty good. Second, Best way to kill a motor is to not use it in my opinion. I like that my kicker gets a good workout on a regular basis. Keeps hours off the main also. I have several reasons I guess.
 

dpcarson

Member
Joined
Mar 24, 2013
Messages
12
Reaction score
0
Points
0
Pay2Play said:
I run a yamaha 9.9 hi thrust kicker on my 208. One of my props is 11.5 X 9.25, I can get 7 knots easy.
I don't run this one much as I troll for walleye and need the slower troll so I have one smaller diameter and pitch. I would suggest larger diameter and more pitch in a 3 blade.


Thanks for that info. about 7 is what I am looking for to keep the blue off the lines and keep the spanish on.