transom - is this structural?

dude23455

Member
Joined
Oct 20, 2020
Messages
19
Reaction score
9
Points
3
Age
41
Location
bocas del Toro Panamá
Model
Sailfish
hi all.

so I'm getting ready for my transom rebuild on my 93 sailfish 252gt. The coosa board and roll of 1708 arrives from the states next week after almost 2 months waiting.

is this cross member on the transom structural? do I need to build a new one into the new transom when I redo it? it does not tie into the hull on either side, stops about 3 inches short.

thanks for the help
 

Attachments

  • 20210101_212655.jpg
    20210101_212655.jpg
    2.2 MB · Views: 13

dude23455

Member
Joined
Oct 20, 2020
Messages
19
Reaction score
9
Points
3
Age
41
Location
bocas del Toro Panamá
Model
Sailfish
a still from a video from above. you can see it end before the hull on the right side
 

Attachments

  • Screenshot_20210101-223302_Video Player.jpg
    Screenshot_20210101-223302_Video Player.jpg
    339.8 KB · Views: 8

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,531
Reaction score
1,420
Points
113
Location
NYC
I can't imagine why it would be there if it weren't structural. Looks like a stiffener. In redoing the transom, are you doing that from inside or outside? Either way, you will probably find out.
 

HTHM

Well-Known Member
Joined
Oct 6, 2019
Messages
148
Reaction score
41
Points
28
Age
62
Location
Mount Hope, On, Canada
Yes, it provides additional rigidity to the transom as @seasick says. Much like the same way a piece of 1 x 2 will strengthen a shelf when fastened at a 90 degree angle. If anything, I would suggest adding another one to give the transom even more strength.
 
  • Like
Reactions: dude23455

dude23455

Member
Joined
Oct 20, 2020
Messages
19
Reaction score
9
Points
3
Age
41
Location
bocas del Toro Panamá
Model
Sailfish
I can't imagine why it would be there if it weren't structural. Looks like a stiffener. In redoing the transom, are you doing that from inside or outside? Either way, you will probably find out.
redoing from the inside. the interior transom glass has cracked and delaminated on the upper port side.

going to cut the cap and pull it off since it has cracks on the stern section. that should give us enough access to redo everything from the inside.

I'm also going to relocate the batteries to the v berth to shift some weight forward.
 

Attachments

  • 20210102_115445.jpg
    20210102_115445.jpg
    2.2 MB · Views: 13
  • 20210102_115421.jpg
    20210102_115421.jpg
    2.2 MB · Views: 13

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,531
Reaction score
1,420
Points
113
Location
NYC
If you are interested, there is a series of detailed videos on youtube covering the replacement of a transom on a Bertram. The videos are from a site called BoatworksToday.com and are an excellent source of info and how to on all things fiberglass.
 
  • Like
Reactions: dude23455

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,034
Reaction score
1,286
Points
113
agree, that needs to come out and redone with the transom. another wonderful gw transom design.
 
  • Like
Reactions: dude23455