- Joined
- Jan 31, 2005
- Messages
- 8,033
- Reaction score
- 1,286
- Points
- 113
Adding this in the Tips section for anyone that needs to repair these.
The stock under gunnel rod holder straps use standard hardware that you can get from a kayak dealer. The top screw end and the bottom J hook end are offered and are basically compression fittings. I didn't find the rubber bungee material, but on my boat the J end broke. I simply worked the top compression fitting off and removed the J hook base. I ordered a few from this place and plan to re-use the existing rubber bungee material. You could replace the bungee with any standard 1/4" bungee material offered if desired.
Here are the links:
For the bungee cord: http://www.kayak-solutions.com/bungee-c ... d_search=0
For the J hook end: http://www.kayak-solutions.com/bungee-c ... d_search=0
For the termination end: http://www.kayak-solutions.com/bungee-c ... d_search=0
The stock under gunnel rod holder straps use standard hardware that you can get from a kayak dealer. The top screw end and the bottom J hook end are offered and are basically compression fittings. I didn't find the rubber bungee material, but on my boat the J end broke. I simply worked the top compression fitting off and removed the J hook base. I ordered a few from this place and plan to re-use the existing rubber bungee material. You could replace the bungee with any standard 1/4" bungee material offered if desired.
Here are the links:
For the bungee cord: http://www.kayak-solutions.com/bungee-c ... d_search=0
For the J hook end: http://www.kayak-solutions.com/bungee-c ... d_search=0
For the termination end: http://www.kayak-solutions.com/bungee-c ... d_search=0