Yamaha CL7

[John Killian]

Anyone have (and solved) a problem with the fuel tank monitoring system? I have a 2021 Freedom 235 and after launching this year, the fuel tank monitoring system no longer shows any data. The first 2 years have been flawless and this is the only issue I noticed when checking all systems at launch today. On a related note, can I assume the fuel consumption data is not related and I can use it to measure fuel usage until I can solve the tank monitoring.

Thanks in advance.

 

[seasick]

The display may have lost it's configuration or the tank sensor is bad or has a bad connection.
If you don't have the manual, go here

https://global.yamaha-motor.com/business/outboards/products/manuals/accessories/gauge/pdf/cl7/en-6ydom-e0-0d.pdf

take a look at the section on configuring the tank sensors on page 1

 

[John Killian]

The display may have lost it's configuration or the tank sensor is bad or has a bad connection.
If you don't have the manual, go here

https://global.yamaha-motor.com/business/outboards/products/manuals/accessories/gauge/pdf/cl7/en-6ydom-e0-0d.pdf

take a look at the section on configuring the tank sensors on page 1

Thanks. the steps in the manual to configure , however, don't appear in my unit's menu - i will try again. I have a call into my dealer as well.

 

[Sauza45]

I use the fuel consumption data all the time. It tells you how much fuel you used, I have 189 gal tank, if the data says I used 80 gals I have 109 gal left. The data is very accurate. When I go to
the gas pump If it says I used 125 gal thats all I can put in .

 

[John Killian]

I use the fuel consumption data all the time. It tells you how much fuel you used, I have 189 gal tank, if the data says I used 80 gals I have 109 gal left. The data is very accurate. When I go to
the gas pump If it says I used 125 gal thats all I can put in .

Perfect, thanks.