vocz's latest activity
-
vocz replied to the thread Bang Plate.You won’t be able to break them. They are 20,000 lbs breaking strength if Yamaha original. -
I did it this way with 2 motor hoists. FYI- make sure those hoists are holding pressure. We left them hanging overnight as we ran out of...
-
Great job Dennis!!
-
The dealer installed the upper and lower bolts from the inside. Threads outside on all. This is common but not ideal. The uppers have...
-
vocz replied to the thread Remove F225 Outboards with Cherry Picker.Absolutely. Thank you for the helpful advice!
-
I've done that before. How else would you do that really? Thats what its for. it was $99 at HF! Think of using it to set my current...
-
thats what I meant by rolled plate... 1/4" or 3/8" flat aluminum
-
vocz posted the thread Remove F225 Outboards with Cherry Picker in Tips, Modifications and Electronics.If someone asks. Yes, it works solid! Removed twin 2002 F225 this weekend. Getting ready for a new used pair.
-
-
vocz replied to the thread Help with 232 Gulfstream.Gulfstream is a heavy/wide boat and under power for a single engine. I would try a Revolution 4 to help with hole shot, planning and...
-
I've towed trailers all of my life...dump trucks with floats...pickups with boats and enclosed trailers...best all around pickup...
-
Looks great. Couple questions, though its hard to tell from the pic. It looks like the bang cap where I circled is tweaked a little...
-
I added a side folding bench on my 330. It could easily adapt to the rear of a 265 like the earlier pics shown in this thread. I got...
-
vocz replied to the thread 265 rear bench seat options/ideas.Not perfect…Off white still a bit lighter than Grady color but very close.
-
vocz replied to the thread 265 rear bench seat options/ideas.Here is the order slip. I ended up cut the legs so it lower and landed on the lumbar when you lean back. much more ergonomic.
-
-
vocz replied to the thread 265 rear bench seat options/ideas.Skunk. The legs support the gate from falling forward so I don’t need to do anything more to the lock. I left it original. I used the...
