gw204's 227 part out and garage/basement clean out sale

gw204

Well-Known Member
Joined
Jan 31, 2005
Messages
2,479
Reaction score
22
Points
38
Location
St. Leonard, MD
***5/5/22 - UPDATE - PROBABALY GOING TO BE MOVING - ALL OF THIS STUFF HAS TO GO - MAKE OFFERS***
***I'll practically give away everything but the port/starboard fish box lids, cabin door/lid and teak trim***
***Buyer pays shipping***

***11/21/18 - ADDED SOME NEW STUFF***

Looking to get rid of a '86 Seafarer 227 parts and a bunch of stuff I've collected over the years. I will add/remove things to this first thread and do my best to keep the list updated as to what's available and what has been sold.

AVAILABLE
*see posts farther down for full descriptions

Port and Starboard Fishbox lids
Cabin door
Cabin door lid
All teak with the exception of the upper cockpit trim
Lower electronics box door
Gauge panel cover
Stainless handrails
Gauge panel
Big, nice anchor rode port
Small, not as nice anchor rode port
Windline universal anchor roller
22' Teleflex throttle/shift cables (1 year old)
Quicksilver 835271Q 2 Flo Torq II hub kits for Yamaha
Seafarer inside cabin shelf
Seafarer inside helm wiring cover
Hull wiring harness - FREE if buyer pays shipping



SOLD

Front and side cabin windows
Full windshield
Michigan Wheel XHS 202 hub kit
4 30 degree Lee's rod holders.
227 windshield mounted anchor/running light
Seafarer cabin bulklheads
Seafarer anchor locker bulkhead and cover
227 helm switch panel
Cabin cushions
Navy blue helm cover
Fishbox drains
Cabin rod storage racks
Stainless bow rail w/out pulpit extension
Windline universal anchor roller
Lee's gunnel mount 1.25" outrigger bases
Helm cover - original white vinyl
 
Last edited:

gw204

Well-Known Member
Joined
Jan 31, 2005
Messages
2,479
Reaction score
22
Points
38
Location
St. Leonard, MD
Re: gw204's Garage/Basement clean out sale

Quicksilver Flo Torq 2 835271Q2 - Used. Quantity 2. 1 is missing the prop nut. Includes 1 spare hub insert (not pictured). Fits the following engines:

Yamaha
Outboard and Sterndrives, V4 and V6 gearcase, 1980 and newer

IMG_1172_zps4mbjf6ur.jpg


IMG_1164_zps09fmtbam.jpg



Flo Torq II kits - $50 + shipping from 20685
 

gw204

Well-Known Member
Joined
Jan 31, 2005
Messages
2,479
Reaction score
22
Points
38
Location
St. Leonard, MD
'86 Seafarer cabin bulkheads. SOLD.

'86 Seafarer inside cabin shelf. Solid, but could use some clean up.

IMG_1154_zpsmzduzxzq.jpg


$25 + shipping from 20685


'86 Seafarer inside helm wiring cover. No rips, stains or mold on the carpet.

IMG_1156_zpsoijlcbge.jpg


$10 + shipping from 20685


'86 Seafarer anchor locker bulkhead and cover. SOLD.
 
Last edited:

gw204

Well-Known Member
Joined
Jan 31, 2005
Messages
2,479
Reaction score
22
Points
38
Location
St. Leonard, MD
Helm switch panel. SOLD.

Anchor/running light. SOLD.
 
Last edited:

gw204

Well-Known Member
Joined
Jan 31, 2005
Messages
2,479
Reaction score
22
Points
38
Location
St. Leonard, MD
Lee's gunnel mount 1.25" outrigger bases. Just the bases, no elbows.

IMG_1274_zpsu3la7k46.jpg


IMG_1275_zpsv4859qu5.jpg


IMG_1276_zpsfwc2vq50.jpg


Not sure what to ask for these. $50/obo + shipping from 20685?
 

gw204

Well-Known Member
Joined
Jan 31, 2005
Messages
2,479
Reaction score
22
Points
38
Location
St. Leonard, MD
Consider it your's. Shall I try and get the socket as well?

PM me your address and I'll get a shipping cost.

Thanks. :)
 

gw204

Well-Known Member
Joined
Jan 31, 2005
Messages
2,479
Reaction score
22
Points
38
Location
St. Leonard, MD
22' Teleflex throttle/shift cables. Part no. CC17922. Approx 1 year old and came off of a Mako 221B.

IMG_0730_zpsnsnlsbcx.jpg


IMG_0729_zps10b4d7n2.jpg


$40/obo + shipping from 20685
 

gw204

Well-Known Member
Joined
Jan 31, 2005
Messages
2,479
Reaction score
22
Points
38
Location
St. Leonard, MD
TH - I got the socket off, but after the first 2" or so the wire insulation is in bad shape. I will try and post a picture tonight.
 

gw204

Well-Known Member
Joined
Jan 31, 2005
Messages
2,479
Reaction score
22
Points
38
Location
St. Leonard, MD
Here's a few pics of the anchor light base. As you can see, the wires are in bad shape. The mounting bracket comes off with 3 screws and exposes more of the inside. I bet you could pop out the contact base and solder new pigtails on. I didn't mess with it though.

IMG_4212_zps96x8wb1o.jpg


IMG_5892_zpsjsvclzuj.jpg
 

TheWavelength

New Member
Joined
Jul 13, 2016
Messages
2
Reaction score
1
Points
0
gw204 said:
Here's a few pics of the anchor light base. As you can see, the wires are in bad shape. The mounting bracket comes off with 3 screws and exposes more of the inside. I bet you could pop out the contact base and solder new pigtails on. I didn't mess with it though.

IMG_4212_zps96x8wb1o.jpg


IMG_5892_zpsjsvclzuj.jpg


Hey, is there any chance this sale fell through? My anchor/all around light base is broken and I'm actually having a really tough time locating a new one. Hell, I'd give you $50 for it. GW's parts department has been not very helpful...
 
  • Like
Reactions: Jimmyz

gw204

Well-Known Member
Joined
Jan 31, 2005
Messages
2,479
Reaction score
22
Points
38
Location
St. Leonard, MD
Yep, still available. But now that I've gotten the base off I would like to keep it together with the light. Would you be interested in both?
 

TheWavelength

New Member
Joined
Jul 13, 2016
Messages
2
Reaction score
1
Points
0
gw204 said:
Yep, still available. But now that I've gotten the base off I would like to keep it together with the light. Would you be interested in both?

Totally. That light looks a bit nicer than the one I've got. I'm in the Philadelphia/Southern NJ area. Are you ok to ship here? Shoot me a PM and we can work out the details...