need seastar part number for grady-white hydraulic hose

ninajoe

GreatGrady Captain
Joined
Jun 13, 2017
Messages
7
Reaction score
0
Points
0
I need the seastar part number for grady-white part number 15-275. It is a 330 express 4' foot hydraulic bulkhead hose that is labeled seastar pro 4 feet. Thanks in advance.
 

ninajoe

GreatGrady Captain
Joined
Jun 13, 2017
Messages
7
Reaction score
0
Points
0
From Grady White support I learned the following part numbers. The 4 foot hose with bulkhead fitting is their part number 240004 and they also carry it under part number 15-275 .
From seastar support I learned that the above grady white part 240004 is seastar HO8204.
I also wanted to change the other 8 foot hoses which are HO8208.
From https://www.seatechmarineproducts.com I learned that HO8204 would not be available until next month but they had HO8704 which has stainless fittings.
They also had HO8208 so I ordered both sets of hoses two day shipping and installed all OK.
 

themikehyde

GreatGrady Captain
Joined
Feb 14, 2017
Messages
131
Reaction score
7
Points
18
Website
www.themikehyde.com
Really interesting timing on this post. Last weekend, while cruising Solomons Island MD, on our 2009 330 express, with autopilot, I noticed the steering a little not what it should be. Checked the lid at the wheel, saw it was a little low and added a little bit. I looked again this ,weekend, and see it may be down a bit. I removed the starboard side access plate in the aft cabin, and I see some fluid on some of the lines. I am going to remove the whole panel, so I can get a better idea what/where the leak is. I Called SouthEastern Marine this morning toes if they had some sort of steering hose diagram, since I did not find one in the manual. They are supposed to be getting back to me.

Please let me know what you find out, because I def. want get these hoses replaced sooner, rather than later.

Thanks,
Mike