Seafarer 228 1987 Cushion Dimensions - posted for your pleasure

[DoctorOctopus]

I am having my Cushions done by a master upholsterer in Turkey, where my mother is located. I will buy the foam here in the USA to stuff the cushions myself
This is for a 288 1987 Seafarer. I believe they are similar for most seafarers until 1992, even then, many of these will be the same on a modern boat.

1) I have posted the cushions that go over the Bow. I included a non-standard bow cushion arrangement so you can lift the forward hatch as well.

2) Aft Cushions
Backrest
Rear Seat Cushions cushions that go over the aft battery/bilge cover seats

3) helm area: Cushions that go over the fish boxes behind the port and starboard helm seats. The snaps are what was on my boat. The locations for yours may be different.

4) Interior Berth Cushions.

This should save some time measuring since this seems to be done often. I figured I might as well post it here once and for all.
Sorry to have used Centimeters, but they are being made overseas.

I hope this is of use to someone looking for this information in the future. If so, give me a shoutout. I will post the dimensions for the seats when I find the photos

Cheers.