Search results

True, it’s booked to be hung on the boat with a new kicker on March 30th as long as the Corona virus doesn’t hit us too hard here on Vancouver Island.

Oops actually it’s a 2012 with 200 hours so a slightly used outboard, first time I have owned Suzuki’s I’ve always been with Yamaha the last 22 years so fingers crossed that the Suzuki’s are as reliable as the Yamaha’s

Cool thanks for clarifying, clear as mud. I’ll leave it in the boat for now even though I bought a Suzuki DF250 with controls and analog gauges that will be hung on the boat in 2 weeks

Here’s another picture of the plug that seems to be factory original or it just happens to fit a factory connection or someone made a connection to fit the factory wiring harness

Yes it looks close but hard to tell for sure in the screenshot, thanks

Here’s a picture of the fuel flow sensor that I removed from the fuel filter housing thanks for this information

There was a Yamaha fuel flow meter on the old fuel filter housing that I upgraded. The guys at the local boat shop had mentioned that when I showed them a picture. Maybe that was what this harness was used for.

I was looking through all the various wires and plugs in the new to me 228G Seafarer and was wondering if anyone knew what this plug might connect to? So far I have found Garmin and Furuno wiring but this one had no names on it, any information or clues is greatly appreciated, thanks, Don

Awesome thank you any information would be great

Sorry to keep asking so many questions but I'd like to build these coaming pads as close to original size as I can. Would someone have the total length and height of the coaming pad backing material? I estimated the total length at 8 feet each pad by putting a tape measure from the starting edge...

Great thanks it does seem hard to find the same original quality that came from the factory.

Hello, I've been looking for a replacement mooring light and post that mounts on the hardtop as mine is broken at the bottom. I can't seem to find an OEM replacement all the ones I have found are quite flimsy ie Victory supplier. Just wondering if anyone knows of a supplier for OEM Grady parts...

Hello, I've been looking for a replacement mooring light and post that mounts on the hardtop as mine is broken at the bottom. I can't seem to find an OEM replacement all the ones I have found are quite flimsy ie Victory supplier. Just wondering if anyone knows of a supplier for OEM Grady parts...

Awesome thanks for the information this is a great site!

Awesome information thank you much appreciated, I will try to get a couple pieces of starboard 5/16 thick for the backing. Would you say that the backing is about 4 inches wide? Would you have length measurements for the 4 pieces as well? I guess 2 of the longer side pieces and then the 2...

Great thank you for the information, I will have to experiment to see what thickness of backing will work. I think I should be able to measure the bend in the clip to get the exact backing thickness. Did you mention that you bought your replacement combing pads?

Hmmm interesting, these are the clips that are on my gunwales ... would those holes in the back of your combing pads fit into those clips in the photo? Thanks

Hello, I recently bought a project 1999 228G Seafarer from an auction in Vancouver BC and it was missing a lot of parts and pieces. I need to make the gunwale pads for both the port and starboard sides that also act as back rests for the stern seats at the transom. The clips are still on the...