Search results

  1. I

    Block GW sailfish 282

    Sorry... bunk trailer
  2. I

    Block GW sailfish 282

    Thanks for the reply. I tried to put the boat on a slight decline and tried to crank it but no go. I figure even if I take most of the weight off the trailer, I should be able to use the winch to move the trailer Thanks again.
  3. I

    Block GW sailfish 282

    Sailfish 282 not sitting right on the trailer. Too far back. New trailer not properly adjusted. I need to move it up about 14 inches minimum. 22 inches would be ideal. I know I can block the transom corners (chines). Can I block anywhere along the centerline at the bow. I just need to...
  4. I

    Compression test on Yamaha LF225's

    Yes, the motor ran well in the sea trial. We didn't notice any issues.
  5. I

    Compression test on Yamaha LF225's

    Unfortunately the service department isn't helping much other than saying "I ran the test and they are within spec". I guess what I want to know is are they "Good - Good" or "Good - but on their way out" if that makes sense. I'm completely clueless on this (but trying to learn).
  6. I

    Compression test on Yamaha LF225's

    Seasick, Thank you for the reply. The exhausts were done about 5 years ago and they provided all the paperwork. I didn't have them checked. I just purchased an online version of the service manual and all it says is "Minimum compression pressure (reference data): 880 kPa (8.8 kgf/cm2, 125...
  7. I

    Compression test on Yamaha LF225's

    Can someone tell me if these numbers are OK for a compression test? I'm buying a GW282 Sailfish with twin 2005 Yamaha LF225TXRD 500hrs Marina says it is all in spec but I thought the numbers needed to be between 170 and 190. I just walked away from a boat because the compression test were all...