Search results

I don’t think they were close enough to the corner that’s why I put them in the center. I also will pull the rear rods off clips on the transom sometimes.

15% vs 0 was so my Wife and grand kids could use them with straight but rods. Never thought about putting them in front of boat. Not sure how you could do that. They are pointed straight out the side. They will only be used for bottom fishing not trolling or rod storage.

Hope this helps. The 2 I specially saw were the 300 marlin and the 330 express

https://blog.seadek.com/grady-white-gets-seadeked/

I found it on there website

Have you checked with seadek. They had my 300 marlin and my 330 express.

I got all 4 out without cutting the deck. I wound up ordering the exact same ones I took out . I’m so over budget right now I’m just trying to wrap it up and get it in the water.

I have all 4 removed now. Really don’t want to go to dealer. Anybody have a link for some on line ? Thanks

Just replacing floor drains. I can’t reach the thru hulls on the starboard side. The hoses and clamps actually look and feel pretty good. The thru hulls on the side of the hull are SS. I would like to find some in stainless but not having much luck. If anybody has a source post it up thanks.

First day since thanksgiving back working on the boat . Decided to crawl down in the bilge and give it a whirl. I’m not gonna lie there was some blood shed but I got one out. I am fairly confident I can get the other one out. Both on starboard side. I looked at the port side and they are...

I think the port side looks to be pretty easy. I’ve got the boat tore apart right now. Mine has the gas generator so don’t have to pull the tank .

I’m thinking about replacing the cockpit floor drains on my 2003 330 express has anybody else done there’s ? I did my marlin and had to cut a section of the floor up to get to the ones on the starboard side. I haven’t crawled down in the bilge yet but looks like it may be possible to do it from...

It’s a ventilation hose off the rear side vents. I knew it was there

One good thing about drilling the transom is now I know 100% it’s dry as a bone. I plan on keeping it that way also.

I added 2 lee 15 degree swivel rod holders. I centered them between the 2 already there. Cut the holes and put 2 coats of resin to seal the core. My plan when I get home from thanksgiving vacation is to use 3-M 4200 to install them.

I just purchased in the last 6 weeks. (2) Garmin 8612’s Garmin 24 fantom Radar B265LM transducer Garmin reactor 40 autopilot with 2.0 pump and GHC20 control . I shopped this stuff til my head hurt. I purchased the garmins from ultimate passage and everything else plus fusion radio with DVD...

No I used the inside mounting holes in that diagram for the mounting . Here’s what I went with. Wound up doing 3 lights.

I’m starting out with 2 for now. Just curious if any 330 owners have them and where they mounted them. This is where I’m thinking

That polished is nice. I just did mine in brushed.

Wife’s making a new one for our 330 express. I spent less than 200. Bucks at sail rite for everything. Material grommets cord and zipper