Search results

I can only go by what there telling me.But i can't see how water go in that tank. they removed and cleaned the tank an installed the new oil pump then reinstalled the tank. I can't see how a motor that ran well the week before, and that morning from the dock to gas dock then up the creek , to...

They did find water in the oil so they say, i was not there when they did. So i got to take there word for it. But what gets me is that, i had a issue with this Eng when i first got it off them. And they pulled the oil tank to clean and replace the oil pump, which is held in place buy a rubber...

Hello: How many on here have experienced this issue, with a Yamaha setup. I have a 1992 Grady White 244 Explorer Closed Transem, I use Yamaha lube 2 stroke oil that is new and sealed not bulk! and ring free and Yamaha fuel stabilizer. Now i have owned at lest 5 other Yamaha setups and never had...

Hello, Has anyone had any experince with a 2003 Yamaha 200 HPDI. Motor has under 700 hrs with a new powerhead and injectors already . I hear that there prone to blow powerheads and injectors . Any advice on the good and bad about this motor would be appreciated.

Thx for the feedback. Had the boat pulled the other day for inspection of the hull before leak down test and compression test. Well right off the bat the Grady Drive was taking on water and leaking, also there was a hole on the bottom of drive and a plate pop riveted to the lower bottom back of...

There must be some one on this site who can shine in, or has own a 24 explorer .

Hello: I'm thinking about buying a 1992 24 Explorer with a 1998 225 hp OX66 Salt water series on a Grady Bracket. Had a look at it the other day, and had it out for sea trial. Both boat and motor seam to be sound. Boat is in the water at this time, will have it pulled to have a look at the hull...

Here is a link to Yamaha zinc anode. Great people to do business with! http://www.boatzincs.com/yamaha_outboard.html

Thx for the help. Got a hold of one of the techs from boatnet.com seams to be that 6K1-45-02 is for the port side & 6J9-45-01 is for the starboard side.

Thx for the replys. But still would like to know witch one is for port & witch one is for starboard!

I have a pair of 1995 200 txrt yamaha's . I was wondering witch one of these zincs go on the port side , and witch one goes on the starboard side. since one is counter rotating? 6J9-45371-01 --------- 6K1-45371-02