Search results for query: rocket launcher

I had to look those up, seems like you could cut a hole in the transom and screw the mounts to the transom? Does that not work, do you need to get under there and bolt them down? What about mounting something like this, I'd put it centered on the transom...

...owner “guesses” this is a lightning rod. 6” long, pointy, snugged with a wing nut and bolted through the hardtop just forward of the rocket launcher. Not convinced that’s what it is - and even less convinced it would succeed at that job. It’s coming off unless somebody here convinces me...

That looks nice. Did you install a backing plate? Can you give me a quote?

If you would like to contact us we can go over what you need to measure to determine of a transom rocket launcher will fit on your set up. This is a custom one we did on a 300 Marlin.

This is good advice. I have enough room on my 228 for the engine to come forward and lock in place. But I can't transport with rods in the holders, they'd scratch up the engine. But it still gives me out of the way storage for 5 rods so that's nice.

If you decide to put the rocket launcher mount in front of your engines raise the engines all the way up first and measure how close they get and be sure you can clear them. I have an ugly scratch on top of my starboard engine cowl because I didn't know they didn't clear and was raising to flip...

...think you will need to relocate much if anything. Investigate a flat as possible mount (flush mount) that allows you to take off the rocket launcher if desired - they make them. The only issue is the cockpit will be tighter. Having the ability to quickly mount/dismount will be a big win...

...of the fuel tank cover on 305/330 express boats. Design is for mounting fighting chair or launchers, I’m going to install a Realese rocket launcher. Just wondering if anyone has removed this large cover and once it’s off I plan to replace any fuel lines and wiring I can as PM Is the cover...

I put my flag staff in the center rocket launcher rod holder. I think it’s like a 20” flag

As seen in my profile pic I fly a 2’x3’' from the rocket launcher. If only flying the ensign it goes in the middle holder which is centerline on my boat, if flying in company with another flag the US flag goes to the starboard and the other to port. If in a parade with a bunch of flags the US...

have seen a bunch of 33 express models with a rocket launcher but think the 305 may be very tight with one

...system for flushing the engine with the freshwater system. There is another post about this if you search for it. I installed rocket launcher rod holders on the rear Bimini leg, for fishing with planer boards. Not for offshore use. I installed dual transducers for SideVu, so I don’t have to...

I bought the rocket launcher for my 305 from WMW. They had it in stock and shipped direct including the mounting hardware. It was considerably cheaper then from my local dealer, who did not include the hardware. In hindsight, on installation I should have mounted it under the hardtop rather...

Is there anyone who has mounted a small rocket launcher stand in the deck of their boat in place of a fighting chair. My boat is a 305 express with factory re enforcement for a fighting chair. Much to small for a chair but a smaller rocket launcher would be ok. If anyone has one, what is the...

i have a wooden flag poke and a 16x24 flag. The pole sits in the middle rocket launcher it is secured with a wire tie through a hole drilled the bottom of the pole. The wire tie simply goes around the bottom cross bar in the rocket launcher. if you do not secure it, the flag and pole with fly...

Can this be purchased from GW ? Thanks

...Amarine clamp ons, because I was hoping that the flat plate would allow me to add one between each of the verticals on the factory rocket launcher. Unfortunately, there is only room on the ends, where the hardtop starts to curve away from the bar. Still experimenting with where to use some on...

11' 7" you should be fine without a radar, you should be good even with rocket launcher, aerials, light etc.. Most trailers would be ok as long as they have torsion axles and bent cross-members. Mine has 15" wheels but she sits very low on the trailer, boat is a couple inches above the guards...

Could you please send me his info? I would like to order this for my 360! Thanks

...a pia to get into I typically bring a 30qt which slides in and out easily. I have seen custom leaning post with tackle storage and rocket launcher installed on the 180. 2. Mine has the freshwater shower installed, tank is under center console, pump is under port aft seat, shower hose is in...