Search results

Test a speaker in the area you are talking about and see if it interfer's with your compass. I found I couldn't mount speakers anywhere in the helm area without impacting the compass on my Sailfish. I put 2 trash cans in the sides, and my water fill is in the starboard side anyway, so need the...

Actually, I did the oil adjustments before last years season. Even after mechanics have checked a couple of different times, both times they said it was correct, but when I checked, it was not ok per the manual so I made the adjustments. Before, I would use more than 1 gallon per motor on this...

Seasick, in my case when I use 1 gal per engine on a long offshore trip trolling for hours on end, I burn about 100-110 gallons usually. Those are hard running as fast as I can stand and usually with bow down pushing the waves down with a bit of bow steer in some cases. These NC seas are always...

I did and SeaStar Solutions helped me with the correct fittings to resolve it. I replaced my copper with new Kelvar hoses and helm when I installed my Autopilot. They were great to work with and knew exactly what I needed.

Installed set I had in the hardtop down to the side gunnels. They sound great in this position and was an easy install. Have to keep them away from the helm as anywhere near causes interference with compass.

I found this for XD100: https://domo-online.com/6-gallon-case-evinrude-xd100-oil/

Ouch Dennis! That is way more than even the Amsoil....lol. I go through 2 gallons each offshore trip. Amsoil compared with the XD100, but again, the additives would be different I am sure. Would be great to find out if anyone has used the 2M oil and does not have carbon buildup. Here is what I...

Yeah, I am in the same mode of thinking. Seems some engines have this issue and others don't. I have 2 and they both do the exact same thing. I use Startron and Ring Free Plus together. I started switching over to the new Marine Techron to see if it helps. Hard to say right now The only...

Hi Seasick, I have adjusted the oil linkages. They were off and I am saving a lot of oil last year. So I know that is not it now. The plugs burn pretty clean, never oily. They are the recommended plugs, same as what came in it. NGK BKR7EKU. I installed the new OXYGEN SENSOR DRAW TUBES...

I use Ring Free religiously and still have lots of carbon. The O2 sensor itself is always clean. It is the chamber that is clogging up not allowing the sniffing to work properly for the O2 sensor to get an accurate sniff and make the adjustments. That is my theory so far. I just don't get the...

I had a dual console and loved it. But the walkaround to me trumps it by far! Ability to store gear, get out of the weather, etc. is valuable to me. I find it very comfortable down in the cabin as well! I can't imagine no Walkarounds. Was sorry to see the 28' size disappear which is the largest...

The amazing thing is when I measure back 8' to simulate the length of the Rhodan, holy smokes, that is long! It comes from the bow back to mid cabin!

Doc, check "Out on the Reef" on YouTube. He mounted his just off to the left of the pulpit and I would do the same as he did on my 252G if I ever get up the bravery to go for it. Hoping to see some others out there that are taking or have taken the plunge and see their mounting options.

Blaugrana, where did you get the SS one's from?

Looks like we have a new upgrade to the GreatGrady Software! YEAH! I am now getting email notifications again and see that new little eye icon next to those watching! KUDO's to the form moderator! Sounds like a donation coming soon!

I would love to have a 96" Rhodan on my 25' Sailfish, but man, that is very long. I watched how "Out on the Reef" Youtube did it on his Parker 21 and think can do similar on the Grady....no bow rail removal or mod. Just push it out the 8' and then it can swing down into the water past the rail...

Yip, was pulling cover off this week, but weather went sour. Will do it this weeked and scrub all the yellow pine pollen off and head for the coast next Thursday! Can't wait!

Why not just adjust the antenna's so they are about 6" to 12" above the hardtop when trailering? I do that on mine and they never hit and are no higher than the rocket launchers. For covering, I use a PVC pipe arch mounted in the rocket launchers with a pipe going back to the transom, then a...

I got mine from BoatSteer Solutions.

Mine are just a finger width away from the rub rail. I have the wider midships which will spread them apart a bit as I come in. I did a simple hack to fix the PVC so they would roll instead of carve blue stripes or gouges. Just cut the PVC pipe about a foot or so above the bottom where it wedges...