Search results

Note that you may be able to easily adjust the sensitivity. I'm sure other brands must have the same feature...On my digital ETEC's, there is a pair of holes/openings on the forward base of the binnacle with recessed screw heads inside. One is for the shift in and out of gear tension, and one...

I was wondering why you decided on a 87" model, as opposed to a 96" (Rhodan).... On that hull (similar to my Trophy Pro), will the 87" be long enough to still bite into the water when trying to hold in rough seas?

Sounds like a bad prop hub to me...

November 2021 I had two new cabinets (to replace the wooden tackle draw cabinets under the seats) made up for me in Seafoam-colored Starboard by Fin Addict Marine in N.C. (referred to me by Grady White) https://finaddictmarine.com/ Not cheap, but excellent workmanship and quality! Contact...

Does it get hot under your bare feet in direct sun?

Seadek

You said your tried disconnecting the fuel line from where it enters the water separator filter (before it enters the motor) and "sucking it out", but that didn't work. Try just connecting a long section of hose to that disconnected fuel line with a fuel primer bulb to SIPHON all the gas out...

I never saw a GW transom set up like that before with those motors set so far apart....she must spin on a dime when throttles are opposed!

Have you tried lemon PLEDGE spray on furniture polish yet?...

Yeah saw that, puzzled me too...might have something to do with the 265 hull I guess....seems like that heavy girl has her own peculiarities. But I ALWAYS use the tabs on my 259G Trophy Pro....Can't imagine not using them, they are indispensable! For example, even if the weight in your boat...

Told ya.

I had a similar issue with my 1988 Trophy Pro....stated getting codes on my 7" Evinrude screen telling me that the port Etec motor lost communication with the control head (electronic binnacle). After chasing down all the wrong possible causes it turned out to be my circa 1988 original battery...

As already mentioned, Boat type makes no difference to the fish. But here is a deadly combo I'd suggest: Stretch 25 or Nomad 220 on a 20 foot long 60 lb mono leader, tied to a 8 oz trolling drail, connected to 60 lb BRAID. (you need the braid to allow the rig to cut down into the water and run...

My SeaDek has been holding up great so far in the FlaDa sun (installed 12/1/2020). Fish blood or bait does not make any stains as long as you clean up the mess and hit it with the salt water wash-down....which you would do anyway even it there was no deck covering. The only issue is it's...

Duct Tape and Vice Grips....the first items I'd add.

Thanks guys, you saved me some work. Based on your comments I did a quick search and it seems that leaving the iPhone on the charger for an extended period after it has reached 100% does no harm. :)

Update: no interference with the Compass at all even though it’s mounted within 8” or so of it. The Scanscrut ROKK recharger works great with my iPhone SE, fast recharging, with great spring loaded “arms” on the mount that hold the phone securely in place even in rough seas. This is the one...

Doesn’t make sense. Your video proves that the trim motor WAS working and the ram didnt move in either direction. (I assume you were trying both the UP and DOWN buttons) So, a defective relay would have nothing to do with the ram moving or not, since it is an electrical component effecting...

Thanks guys, great answers! Amazon will be delivering my new Sanscrut ROKK charger in a couple of days, I will let you know if it affects my compass when it’s mounted on that console “shelf” on the port side of the steering wheel.

if so, how far away does it need to be? Thanks for your input!