Search results

I repowered couple of years ago with F250's 4.2L and the the price with install was 50K. My original quote was around 65K bc that included new electronic shifting gauges etc. They do have a mechanical 4.2L f250 that uses existing controls and gauges - great option for repower - the electronic...

Not sure if you are in salt enviroment but it may be time to replace the bolster brackets - when I removed mine to replace the brackets were literlly just flaking apart after 10 years in the salt.

Not sure how the fitting on you engine is attached but on my outboards I replaced them with quick release/atttach and they just snap on and off. Readily available at lowes / Home Depot

Just put in a new charger and it is wired directly to the battery - the same as the original was.

When u normally go out with one or 2 are you able to get to max out higher than 5200. The engine should be closer to 6K at max. Could be a prop size issue?

Grady dealers stock it in my area. t

When you try the shower does the pump turn on or is there silence. If the pump cycles on it may be a clog in the in-line filter or a clog in the shower head. I am not familiar with how your system works but if it has an on/off switch at the faucet and the pump does not cycle on It is probable a...

The Gulfstream is a very capable 23 footer. it can do just about anything a 28-30 footer can just not as comfortable. i had a gulstream with a single engine but i do not recal the fuel capcity. If you are planning on twins you'll need to calculatethe spans between ports you intend to travel to...

Tip before you take the sender off to exam it, draw a line with a black marker from the sender onto the tank so that can either reinstall or replace getting the exact orientation. The screw/bolt holes can be stripped easily of you do not get it right. Also do not remove the sender with a full...

I have a Sailfish - we do a lot of overnight excursions 1-3 day, We sleep 2 in the forward berth and our daughter used to sleep in the aft berth with a golden retriever. I would say it is comfortable but very basic. Bigger is usually better but the budget generally helps you decide.

$1,800 per chair and base?

The easiest way is to use the opposite window as a template and go to a local glass shop. Most shops send the template to a supplier who does tempered glass. Mine too, think about a week, not cheap think it was $125. Some on this site have opted for plexi glass and cut it themselves from some...

I have an 04 Sailfish and was worried about my transom because of thedisintegrating bang cap. I had the bang cap replaced last year and the dealer said it was solid and no signs of rot or moisture. They sealed it with glass and installed a vinyl bang cap over it. The key is to ensure the bang...

I have a 12 inch and a marine radio in lower box and even installing them each spring is challenge. I used the upper box for radar and or fish finder. I do like the looks of the front mounted electornics on the lower boxes.

I replaced mine with the Isotherm. It is an improved model over the original and it is now AC/DC. The unit sensors identify when it is on AC or DC and autoamatically switches itself. It did take a little retro work bc I had to add an AC outlet in back of the frig. Wasn't that difficult bc there...

I had 2 2004 with 720 hours on them in 20n17 and lost both of them to exhaust corrosion that spread to the powerhead. Had them inspected every other year for the previous 8 years and they were clean. Even when they went in for inspection the last time they were running flawlessly. As someone...

GE Almond is what the GW dealer near me uses.

Souds like sending unit - mine have access through the popout deck plate. Easy fix just make sure your hole alignment is correct as it is easy to strip. I marked a line from on the existing sender and the tank so I could easily identify the correct orientation. Make sure there is not a full...

Looks great! Are you able to clean it just using soap and water?

I switched to Petitt hydroco.at about 7 years ago and think it is a much better paint for keeping marine growthat bay. Most of extreme buildup that I experienced has gradually disappeared over the years including chipping and peeling. I also find that power washing the bottom is a lot more...