Search results

  1. E

    Tips needed - Windlass nut removal

    look carefully at the video. yours was worked on. not the same fastener as the tech removed from the gear assembly.
  2. E

    Trim tab cylinder lower attachment eye cracked

    you might want to email Bennett directly on their website. very helpful and very quick responses.
  3. E

    Tips needed - Windlass nut removal

    possibly not made to be separated. check how a replacement part is configured. one piece or multiple.
  4. E

    Flush Mount Remote Control Freedom 205

    if there's no other access point, probably thru the speaker hole. cant see what's in front or behind the throttle in your pics.
  5. E

    Corrosion of trim pump

    pump covers basically suck. should be ABS. had to clean and paint my F350s annually. replacing both on 2021 F300's (under YES, see my comments there). i would plan on replacing. good luck, ron
  6. E

    Yamaha Extended Engine Warranty - Is it worth it?

    If it breaks it's worth it. if it doesn't it's not worth it. just like any other insurance. i get them for piece of mind and they kicked in a few times. good luck, ron
  7. E

    Engine distance suggested by GW and source Vinyl bang cap other than GW

    i believe engine placement is based on hull bottom and anti-vent plates positioning. your installer should be able to tell you were they need to be set.
  8. E

    Shorepower breaker

    belay the isolator comment. that pic looks like the grounds going to the isolator. you should still verify corrosion issues with them and the isolator itself.
  9. E

    Shorepower breaker

    one more thing. if you haven't been in there for a while, be ready to replace some of the wire runs if they show signs of corrosion
  10. E

    Shorepower breaker

    yeah. galvanic isolators are a bit larger now as far as i know. you may not get the exact breaker, but they are available. agree that you need to verify the galvanic isolator aspect. ron
  11. E

    Generator space

    the space is not a "fast access" area. you have to deal with the seat, the vertical door and the floor latches (if you don't lock them down it will vibrate). there is a ton of space though. the Marlin spec should have been with the batteries in the center. relocation to port should have been...
  12. E

    Generator space

    well if you haven't been in it in the water you will notice the list when you do. the 2021 had a starboard side drain in the fishbox. did not drain due to the batteries. great boat tho. have fun, ron
  13. E

    Generator space

    i did this because battery placement was hard port list.
  14. E

    Battery runs low on anchor

    weird. don't know why it didn't just post the image. download is clean. Ron
  15. E

    Battery runs low on anchor

    this is the battery layout for a 2009 Express 330. "Main" comes off the Starboard batteries. you may want to recheck the install. good luck, ron
  16. E

    Sign n glid

    a Boat US membership is separate from the insurance. you can still get the membership for towing and WM & other discounts.
  17. E

    bilge hatch

    https://southco.com/en_us_int/resources/what-is-a-compression-latch there are some that are mostly flush. these plus gasket material may work fine. good luck ron
  18. E

    Kicker steering on 228 Seafarer?

    https://ezsteer.com/
  19. E

    Kicker steering on 228 Seafarer?

    Doesn't EZ-Steer make various lengths? used in the past, worked perfectly.