01 voyager speed

Marlon Jones

Member
Joined
Oct 5, 2021
Messages
7
Reaction score
0
Points
1
Age
63
Model
Voyager
Hello I'm looking for help with the speed of my voyager/Yamaha ox66 250, my rpm at wot is 5600+ and speed is about 26mph
What's the issue and what size prop would be advisable. Thanks in advance
 

family affair

Well-Known Member
Joined
Jul 31, 2010
Messages
1,437
Reaction score
339
Points
83
Location
Ohio
Model
Islander
Is your prop damaged? What prop do you have now.
You should have something like a 15 1/4 x 17 and get mid 40's for top end at 5500 rpm.
 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,531
Reaction score
1,420
Points
113
Location
NYC
WOT seems a bit high, check current prop as mentioned. Speed is low but before you go buying a new prop, a few questions:
How are you measuring speed? ( GPS on a MFD) or the speedo info?
How does your hull bottom look?
Is the motor the correct shaft length for the hull?
Did it ever run faster or is the boat new to you.
Finally, if you start from a stop and push the throttle forward hard, do the revs jump to wot very quickly? ( if so, your prop may be incorrect , spun or your prop is ventilating.)

To determine the pitch of your current prop, you may need to pull it since the specs are often stamped on the inside of the hub that faces the lower unit.
The outside of the hub may have a stamp like 17M . That doesn't tell the whole story.
 
Last edited:

PT G

GreatGrady Captain
Joined
Dec 30, 2021
Messages
54
Reaction score
36
Points
18
Age
79
Location
Poughkeepsie, NY
Model
Voyager
Hello I'm looking for help with the speed of my voyager/Yamaha ox66 250, my rpm at wot is 5600+ and speed is about 26mph
What's the issue and what size prop would be advisable. Thanks in advance
I'm following this one for sure...what size prop are you currently running? I've got the same setup circa 2000 but haven't been out in it long enough to start my data base....
 

Zac

New Member
Joined
Jul 1, 2022
Messages
2
Reaction score
1
Points
3
Age
54
Model
Marlin
I own a pair of gently used OX66/ 250's . Durability not in question. As of late I learned they are very finicky. O2 sensors, fuel injection nozzles, fuel rail pump pressure, throttle positioning sensors, fuel age and some other considerations. I'm not a prop expert and I won't pretend to know. What I have found is a great Yamaha mechanic with years of experience with the OX66. He could possibly suggest an alternative to expensive prop replacement and dice throwing, if you know what I mean. Send me an email if you are interested in talking with him.
 
  • Like
Reactions: PT G

5-Salt

Well-Known Member
Joined
Sep 11, 2005
Messages
281
Reaction score
15
Points
18
Location
Oregon
Model
Voyager
Top speed for my 97 Voyager with OX-66 250hp motor and Yamaha 17=M stainless prop is 35-38mph at 5,300-5,500rpm's. Loaded with fishing gear, 75gal of fuel, and 3 adult males is 30-32mph
Running at 4.200-4,400rpm's, my speed is 25-27mph.

Let me know if you want the prop specs




17-M Prop.jpg
 

Mustang65fbk

Well-Known Member
Joined
Jun 4, 2020
Messages
2,577
Reaction score
682
Points
113
Age
38
Location
Seattle area
Model
Seafarer
I emailed Grady to get the performance data sheet for my boat and they emailed it back to me in about an hour or so. I’d reach out and see if they have the information on your boat as well. 26 mph @ 5,600 for WOT seems very slow to me as my boat, although slightly different, is around 45 mph and I’ve personally gotten it up to 40 mph. With a different prop, less weight and so forth I could definitely see it being a 45 mph boat though.