1993 208 Adventure Hardtop Kicker Addition

Dboardfox

Active Member
Joined
Nov 16, 2021
Messages
29
Reaction score
13
Points
3
Age
42
Model
Adventure
Just acquired a 1993 208 Adventure with a 2006 Yamaha 225 (exhaust corrosion kit already done) and want to add kicker to starboard side. I have seen a small offshore bracket posted on the forums that may work. Anyone done this before with similar engine?
DB
 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,531
Reaction score
1,420
Points
113
Location
NYC
How low does the stern sit with the 225? I am concerned about two things: Scuppers under water and possible a list to starboard with the kicker added. Originally the oil tank was on the port side and batteries on the starboard side. I assume the oil tank was removed but where are the batteries? If still in the aft starboard locker, you may need to relocate them (and the battery switches to the port locker for balance.
 

Dboardfox

Active Member
Joined
Nov 16, 2021
Messages
29
Reaction score
13
Points
3
Age
42
Model
Adventure
I will get back to you on that. I just acquired the boat and will be taking it out on Sunday. My recollection during sea trial is that scuppers were above water, how much above I do not recall.
DB
 

Dboardfox

Active Member
Joined
Nov 16, 2021
Messages
29
Reaction score
13
Points
3
Age
42
Model
Adventure
Update its a 200. In my excitement for my new grady I made a typo. 200hp. Will report back.
 

Dboardfox

Active Member
Joined
Nov 16, 2021
Messages
29
Reaction score
13
Points
3
Age
42
Model
Adventure
Draft looks fine. Ran into other issues on the water which confirm the need for a kicker.
 

Richard Szeg

Member
Joined
Mar 22, 2019
Messages
7
Reaction score
1
Points
3
Age
65
Location
Victoria, BC
Model
Sailfish
Kicker should be mounted on port side. Will track and steer with a bit more authority fwiw.
 

Dboardfox

Active Member
Joined
Nov 16, 2021
Messages
29
Reaction score
13
Points
3
Age
42
Model
Adventure
@Richard Szeg I have heard of people attaching to starboard side too because of that swim platform. Ideally I want port but let me see what my shop says and cost.
 
  • Like
Reactions: Richard Szeg

Dboardfox

Active Member
Joined
Nov 16, 2021
Messages
29
Reaction score
13
Points
3
Age
42
Model
Adventure
So guess what kickers are a bitch to order in covid. Dealer said a year. F that. Ordered online with a fixed extended bracket. So the question is can anyone give me general mounting info when mounting to the port side. Merc 9.9 high thrust 126lbs. Also any info on best practices to get fuel to this 2022 gem of a kicker.
DB
 

Herman quail

Member
Joined
Jul 31, 2021
Messages
9
Reaction score
1
Points
3
Age
64
Model
Seafarer
I also got a kicker motor this fall. Putting in on a 228 with swim deck .Have made the bracket part that sits on the swim platform and now I need to make the support that goes under the platform to support the extra weight.
My question is , how is the angle bracket attached to transom. Is it lagged or through bolted. I was reading the transom on a gulfstream is 2.5 inches . I know through bolting is stronger, but hate putting holes in hull when not needed. All forces seem to be pushing into transon. Seems lags with 4200/5200 would work as well.
Following this thread
 

Dboardfox

Active Member
Joined
Nov 16, 2021
Messages
29
Reaction score
13
Points
3
Age
42
Model
Adventure
I will be bolting through with a backer plate. Adventure marine sells the bracket. Just arrived seems very high quality. Unfortunately I just got covid and have a 2 person job to do to hang the new kicker properly. It will need to wait a few weeks. I will check back in once mounted.
 

grunt

Active Member
Joined
Aug 23, 2013
Messages
36
Reaction score
7
Points
8
Location
Staples, Ontario
Here is the setup that I installed on my 2007 208 Adventure

Grady White 208 June 2014 006.JPG
 

Attachments

  • Grady White 208 June 2014 005.JPG
    Grady White 208 June 2014 005.JPG
    2.3 MB · Views: 37
  • Like
Reactions: hanke777

trapper

GreatGrady Captain
Joined
Jan 7, 2010
Messages
822
Reaction score
209
Points
43
Looks great, have the same set up on my 208. Just finished installing two group 31 batteries on the port side to offset weight of kicker and bracket. Have not got it wet since install so hoping its a good balance.
 

Mark DV

Well-Known Member
Joined
May 24, 2020
Messages
98
Reaction score
15
Points
8
Age
46
Model
Adventure
How do you steer the kicker?
 

Dboardfox

Active Member
Joined
Nov 16, 2021
Messages
29
Reaction score
13
Points
3
Age
42
Model
Adventure
Once I have mine installed I will have a remote pilot that I operate from a remote. Extra 1k but F it I already bought a Grady. Lol
 

trapper

GreatGrady Captain
Joined
Jan 7, 2010
Messages
822
Reaction score
209
Points
43
Same, my main is tied to the kicker so steering from the helm or the AP (connected to the main) activates the kicker.
 

Dboardfox

Active Member
Joined
Nov 16, 2021
Messages
29
Reaction score
13
Points
3
Age
42
Model
Adventure
@grunt and all 208 owners. I ordered the same adventure bracket. High quality bracket. I also ordered a 2022 merc pro 9.9 25" kicker to mount. Well there is some damping rubber that had to get removed for the mount. Will send pics shortly but wanted to share.
 

Dboardfox

Active Member
Joined
Nov 16, 2021
Messages
29
Reaction score
13
Points
3
Age
42
Model
Adventure
Installed ready to break it in. If you want details let me know.
DB
 

Attachments

  • Compress_20220217_164848_8191.jpg
    Compress_20220217_164848_8191.jpg
    349.9 KB · Views: 53
  • Compress_20220217_164848_8398.jpg
    Compress_20220217_164848_8398.jpg
    508.6 KB · Views: 55
  • Compress_20220217_164848_8554.jpg
    Compress_20220217_164848_8554.jpg
    475.4 KB · Views: 51
  • Like
Reactions: hanke777

trapper

GreatGrady Captain
Joined
Jan 7, 2010
Messages
822
Reaction score
209
Points
43
Looks great, I have the same bracket but went with full helm control of the kicker. Did not realize how big the v6 F200 is. Enjoy the "break in" and quiet kicker trolling!
 

Dboardfox

Active Member
Joined
Nov 16, 2021
Messages
29
Reaction score
13
Points
3
Age
42
Model
Adventure
So on to the next endeavor. Trim tabs and also My 208 is plumbed for a rear back center livewell that should sit on the deck right before the notch. If anyone has experience with these mods let me know.
DB
 

grunt

Active Member
Joined
Aug 23, 2013
Messages
36
Reaction score
7
Points
8
Location
Staples, Ontario
We just steer with the big engine when trolling...no need for anything else...simpler the better