2005 Tournament Windscreen not aligned

T_Wrecks

Member
Joined
Jun 25, 2021
Messages
15
Reaction score
3
Points
3
Age
41
Anyone have any idea how this would happen, or any idea as to how to fix it? This boat was new to me last year.
 

Attachments

  • 20230925_150422.jpg
    20230925_150422.jpg
    1.2 MB · Views: 15
  • 20230925_150515.jpg
    20230925_150515.jpg
    2 MB · Views: 14
  • 20230925_150456.jpg
    20230925_150456.jpg
    1.5 MB · Views: 15
  • 20230925_150419.jpg
    20230925_150419.jpg
    1.1 MB · Views: 15

SkunkBoat

Well-Known Member
Joined
Oct 12, 2017
Messages
4,522
Reaction score
1,619
Points
113
Location
Manasquan Inlet NJ
Website
www.youtube.com
Model
Express 265
The supports are adjustable at both ends

Either the starboard side is too high or the port (hinge) side is too low. Or both

loosen the feet to adjust
 

glacierbaze

Well-Known Member
Joined
Jul 6, 2012
Messages
2,500
Reaction score
650
Points
113
Age
75
Location
Chapel Hill and Pine Knoll Shores, NC
Model
Seafarer
Windshield support struts have slipped at the top, where the two grooved surfaces meet. If your hinge is still aligned on the port windshield, loosen the two Phillips head screws right above the black ball, and push outward on the top of the port windshield and see if everything lines up, and re-tighten.
Let’s see the port side of the hinged center window.
 
Last edited:

T_Wrecks

Member
Joined
Jun 25, 2021
Messages
15
Reaction score
3
Points
3
Age
41
Windshield support struts have slipped at the top, where the two grooved surfaces meet. If your hinge is still aligned on the port windshield, loosen the two Phillips head screws right above the black ball, and push outward on the top of the port windshield and see if everything lines up, and re-tighten.
Let’s see the port side of the hinged center window.
Awesome. Thank you
 

T_Wrecks

Member
Joined
Jun 25, 2021
Messages
15
Reaction score
3
Points
3
Age
41
Windshield support struts have slipped at the top, where the two grooved surfaces meet. If your hinge is still aligned on the port windshield, loosen the two Phillips head screws right above the black ball, and push outward on the top of the port windshield and see if everything lines up, and re-tighten.
Let’s see the port side of the hinged center window.
This is why this community is great. Thank you.
 
  • Like
Reactions: Peter A