228 Teak Trim Painted

leeccoll

GreatGrady Captain
Joined
May 18, 2019
Messages
1,052
Reaction score
416
Points
83
Age
60
Location
Reno NV
Model
Seafarer
Howdy Folks, I took off my 1987 teak trim last season as it was broken in a few places, and horribly weathered. Got used to no trim for a while then I tried to use teak oil on the rear rod holders bracket, and it looked horrible after I tried that route. I decided to paint it.

Okay, so there is A LOT of opinions about durability, and bleed through etc. I used to paint houses in college during the summer, so I know a good mineral spirits daily handwash from the oil based paints we used back then.

I ultimately decided to go this way because I already have the wood. If it fails down the road, so be it, I will do the same with starboard. Nothing to loose but time and effort, and a few bucks.

I used a shellac based primer (holds the oils from teak at bay) liberally then sanded down smooth, re applied primer again multiple coats and used a oil based enamel paint that I was able to get charged into 10 spray paint cans. I also was able to select the color match. Important for me. I was surprised I could get my hands on the oil base paint. Was not cheap, but the lustre is super!

I love the cleaner look now, so no regrets, we shall see if it lasts, but I have a good feeling about it.

PS-Yeah, I know I need new cushions :p
 

Attachments

  • 20190630_101650.jpg
    20190630_101650.jpg
    1.5 MB · Views: 131
  • 20190709_123652.jpg
    20190709_123652.jpg
    861.6 KB · Views: 137
  • 20190709_163928.jpg
    20190709_163928.jpg
    2 MB · Views: 139
  • 20190709_123655.jpg
    20190709_123655.jpg
    787.9 KB · Views: 147
  • 20190710_151600.jpg
    20190710_151600.jpg
    936.9 KB · Views: 149
  • 20190710_151609.jpg
    20190710_151609.jpg
    1.4 MB · Views: 154
  • 20190710_151618.jpg
    20190710_151618.jpg
    1 MB · Views: 150
Last edited:

Ky Grady

GreatGrady Captain
Staff member
Joined
Mar 1, 2006
Messages
3,027
Reaction score
1,351
Points
113
Location
Berea, KY/Cross, SC
Model
Seafarer
I'm with you. I love the cleaner look. It updated the overall look quite a bit. I like the teak look also, but the white makes it look fresh.

Just noticed after reading this,,,,got alot of LOOKS going on.
 
  • Like
Reactions: leeccoll

leeccoll

GreatGrady Captain
Joined
May 18, 2019
Messages
1,052
Reaction score
416
Points
83
Age
60
Location
Reno NV
Model
Seafarer
I'm with you. I love the cleaner look. It updated the overall look quite a bit. I like the teak look also, but the white makes it look fresh.

Just noticed after reading this,,,,got alot of LOOKS going on.

Thank you Ky. I left the backs of the wood trim untreated teak, hoping whatever oil is left in the wood mitigates there.

It's just nice having trim on again. That paint I used becomes hard as a rock when fully cured in 2 weeks, and impervious to weather according to manufacturer.

Anyway, this was one project where the outcome exceeded expectations.
 

leeccoll

GreatGrady Captain
Joined
May 18, 2019
Messages
1,052
Reaction score
416
Points
83
Age
60
Location
Reno NV
Model
Seafarer
That looks great, makes me think about the weathered teak on our 1988 Seafarer!
Well thank you!
Yeah, I got tired of staring at that old teak. Plus I keep my boat outside uncovered.
Nice thing the painting can be done at home. My boat is an hour away.
 
Last edited:

Bob275

Member
Joined
Aug 12, 2018
Messages
7
Reaction score
0
Points
1
You could also replace the teak with Starboard, a little at a time, never have to paint it again.

Cuts just like wood, just made this to replace some unused drawers.
20190707_144131.jpg
20190707_151839.jpg
 
Last edited:

leeccoll

GreatGrady Captain
Joined
May 18, 2019
Messages
1,052
Reaction score
416
Points
83
Age
60
Location
Reno NV
Model
Seafarer
Will go that route if the teak doesn't hold up.

One thing I do like about the painted teak vs starboard is the wood grain and contours I can still see.

Thanks for the suggestion ;)
 

cbartle60

Active Member
Joined
Oct 10, 2019
Messages
25
Reaction score
5
Points
3
Age
52
Model
Offshore
Nice job! Hope it holds up as well as it looks. I’m considering doing it to my Grady...how much did you spend…gotta be less than replacing with starboard.
 

leeccoll

GreatGrady Captain
Joined
May 18, 2019
Messages
1,052
Reaction score
416
Points
83
Age
60
Location
Reno NV
Model
Seafarer
Probably $150 including primer, etc.

I like the painted teak because you can still see the wood grain lines here n there vs starboard.
 

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,029
Reaction score
1,286
Points
113
Agree, that really came out nice. Hopefully it holds up well for you.
 
  • Like
Reactions: leeccoll

Betty White

Member
Joined
Sep 3, 2019
Messages
10
Reaction score
3
Points
3
Age
33
Model
Seafarer
We recently re-did the trim on our 1986 Seafarer, when be bought the boat it it had starboard that was cracked and missing in chunks so ripped that all off and as a replacement we cut new teak and just used teak oil, we are really happy with the way it turned out. Gave it an old school classic look and tied in nicely with the teak around the cuddy (re-finished and oiled that as well).
 

Attachments

  • IMG_5771.jpg
    IMG_5771.jpg
    1.5 MB · Views: 40
  • IMG_5769.jpg
    IMG_5769.jpg
    1.6 MB · Views: 39

leeccoll

GreatGrady Captain
Joined
May 18, 2019
Messages
1,052
Reaction score
416
Points
83
Age
60
Location
Reno NV
Model
Seafarer
Applause Betty White,
Because I know how much work was involved!
 

DoctorOctopus

Well-Known Member
Joined
May 10, 2020
Messages
87
Reaction score
9
Points
8
Age
56
Location
Far Rockaway, NY
Model
Seafarer
We recently re-did the trim on our 1986 Seafarer,
nice canvas work too. I have the same model of 86 seafarer 22
I re-did my original wood several times. A fun afternoon for sure. however, I am now going to let it go gray as teak has traditionally meant to be. not as pretty for sure!
 
Last edited: