- Joined
- Sep 24, 2023
- Messages
- 31
- Reaction score
- 6
- Points
- 8
- Age
- 62
- Location
- Richmond, Virginia
- Model
- Islander
My 270 has a Kenwood stereo. The boat is new to me. When I got the boat last winter the stereo would power up. Now it does not. My boat does not have 30 amp power, so I have four red tabs with the battery switches. One master, two bilges and "memory". I think memory is the direct wire to the stereo. I was unable to get the stereo enclosure off to determine if there was power, so I am hoping someone can maybe point me in the right direction.
-The batteries are charged
-The switches are on
-All other 12V is working
-There are two accessory switches on the panel, I turned those on just in case
-I checked every fuse in the sub panel under the dash, all ok
I feel I am missing something that is right in front of me. My manual does not really explain what the red breakers are with the battery switches. Could "memory" be bad? How do I check the breakers?
Any help would be much appreciated.
David
-The batteries are charged
-The switches are on
-All other 12V is working
-There are two accessory switches on the panel, I turned those on just in case
-I checked every fuse in the sub panel under the dash, all ok
I feel I am missing something that is right in front of me. My manual does not really explain what the red breakers are with the battery switches. Could "memory" be bad? How do I check the breakers?
Any help would be much appreciated.
David