Another Transom Question

Shannon C.

GreatGrady Captain
Joined
Jun 20, 2019
Messages
136
Reaction score
37
Points
28
Age
53
Location
Santa Cruz CA
Model
Marlin
Hello everyone,

Down at the boat today and noticed some cracking in the transom area, are these superficial or is it something that should be brought to the top of the list.

BTW, transom cap was resealed last year. I’m the second owner, had it out 1 time this year and just noticed it today.

Thanks,
I hope everyone had a great weekend .
 

Attachments

  • 65CC9C89-B404-44AA-A6A6-02F2E2100BD7.jpeg
    65CC9C89-B404-44AA-A6A6-02F2E2100BD7.jpeg
    849.9 KB · Views: 65
  • D12F8ECF-D47E-452C-81E8-14763D57CC3C.jpeg
    D12F8ECF-D47E-452C-81E8-14763D57CC3C.jpeg
    917.1 KB · Views: 63

SmokyMtnGrady

Well-Known Member
Joined
Jul 11, 2009
Messages
2,020
Reaction score
504
Points
113
What year is the boat? Those look like flexing going on , I could be wrong. Others here may know or have experience on this issue. If you don't get a good vibe here, it might be worth contacting a reputable surveyor.
 

Shannon C.

GreatGrady Captain
Joined
Jun 20, 2019
Messages
136
Reaction score
37
Points
28
Age
53
Location
Santa Cruz CA
Model
Marlin
What year is the boat? Those look like flexing going on , I could be wrong. Others here may know or have experience on this issue. If you don't get a good vibe here, it might be worth contacting a reputable surveyor.
Sorry, it’s an 05 Marlin.
 

leeccoll

GreatGrady Captain
Joined
May 18, 2019
Messages
1,052
Reaction score
416
Points
83
Age
60
Location
Reno NV
Model
Seafarer
Shannon,

I have spider webs like that in many places on gelcoat, but my hull is '87.

That is cosmetic in my opinion, but I cannot see where they lie on you transom because of the close up pic.

Usually people grind down the hairline cracks using a dremel or similar and then refinish like so~

 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,530
Reaction score
1,420
Points
113
Location
NYC
It's something to keep a picture of and compare to over time. Looks like stress cracks which can be caused by a few different factors; Flexing of course, a problem on the original layup, swelling due to either water ( a moisture test could be helpful, or possible cracking due to freeze thaw cycling ( is the boat store in a cold region? Can you post a few pics with wider coverage? It may help to see where the cracks are radiating from.
 

Shannon C.

GreatGrady Captain
Joined
Jun 20, 2019
Messages
136
Reaction score
37
Points
28
Age
53
Location
Santa Cruz CA
Model
Marlin
Shannon,

I have spider webs like that in many places on gelcoat, but my hull is '87.

That is cosmetic in my opinion, but I cannot see where they lie on you transom because of the close up pic.

Usually people grind down the hairline cracks using a dremel or similar and then refinish like so~

That's what I was kinda thinking. I had a BW Conquest before with spider cracks around the same area.
 

Shannon C.

GreatGrady Captain
Joined
Jun 20, 2019
Messages
136
Reaction score
37
Points
28
Age
53
Location
Santa Cruz CA
Model
Marlin
It's something to keep a picture of and compare to over time. Looks like stress cracks which can be caused by a few different factors; Flexing of course, a problem on the original layup, swelling due to either water ( a moisture test could be helpful, or possible cracking due to freeze thaw cycling ( is the boat store in a cold region? Can you post a few pics with wider coverage? It may help to see where the cracks are radiating from.
Will do.
The boat left NC and headed straight for SoCal and never left. I keep the boat in Santa Cruz and the climate is pretty steady. I had the boat surveyed and a moister test was done in addition to the hammer test with very little detected, except, that damn aluminum transom cap needed to be addressed so that was the first thing I did. I wonder if they have been there for some time and I'm just noticing it, IDK. I'll been at the boat today, splashing for a week so I can give the trailer a major overhaul, more pics to follow.
 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,530
Reaction score
1,420
Points
113
Location
NYC
Have fun working on the trailer! Been there, done that. The secret is a MAP torch and PB Blaster.
 

Doc Stressor

Well-Known Member
Joined
Nov 13, 2009
Messages
1,186
Reaction score
295
Points
83
Location
Homosassa, FL
Model
Seafarer
Those are just spider cracks in the gel coat. Nothing to worry about. Sort of like wrinkled skin as you get old. :)
 
  • Like
Reactions: SkunkBoat

georgemjr

Well-Known Member
Joined
Jan 2, 2009
Messages
442
Reaction score
38
Points
28
Location
Bay Shore, Long Island NY
From what I have been told (and I have seen this on many boats) is that the fiberglass flexes to a greater degree than the gel coat can, especially if the gel coat is thick (or too thick). That fiberglass flex which is completely natural and normal can crack the gel coat.
 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,530
Reaction score
1,420
Points
113
Location
NYC
From what I have been told (and I have seen this on many boats) is that the fiberglass flexes to a greater degree than the gel coat can, especially if the gel coat is thick (or too thick). That fiberglass flex which is completely natural and normal can crack the gel coat.
That is true, gel coat is pretty hard and rigid stuff. As I mentioned, I would document and watch those sections to see if and how fast the cracking progresses. The part that originally concerned me was the statement that he "went down to the boat today and noticed the cracks".
If the cracking has occurred recently and quickly, it would be much more of a concern.