Bang end caps

[Determined]

Hello all!

I have a 2001 Islander and am looking for the bang end caps..

I have givin Grady a call and was told they dont have a part # for that .. I have seen a few guys that have replaced them and was hoping maybe some body could help me out with a part number or maybe point me in the right direction.

Thanks in advance.

 

[DennisG01]

Call or go to your local dealer - they can sell it to you by the foot. Or by any plastic or FRP angle that you want from just about anywhere. Really, just about ANYTHING can work - it's just a simple cover. Paint to match.

 

[Determined]

Yeah i sure i could fabricate something .. but was hoping to replace them with the same molded 90 degree angle ones.

 

[DennisG01]

Yeah i sure i could fabricate something .. but was hoping to replace them with the same molded 90 degree angle ones.

FYI, that's what an "angle" is (abbreviated terminology).

Otherwise, read my first sentence again

 

[DennisG01]

Are you referring the ones at the corners or the one along the top of the transom (under the engine)?

 

[Determined]

yes I called the dealer.. and I call grady white direct as in my first post..

 

[Fishtales]

I believe he is looking for the termination blocks at the end of the rub rail.
Maybe check some salvage yards or businesses near you?

 

[Halfhitch]

If you are looking for rub-rail end caps, look here....
https://tacomarine.com/accessories-7

 

[wspitler]

I ordered the bang cap end caps for my 2007 330, along with the newer vinyl bang cap. 7' in my case. The dealer had the part number and drop shipped the end cap pieces from GW. I had to trim them slightly to get the proper fit. May work for your boat, but GW may be able to send you dimensions and you could trim to fit.

 

[Determined]

If you are looking for rub-rail end caps, look here....
https://tacomarine.com/accessories-7

I ordered the bang cap end caps for my 2007 330, along with the newer vinyl bang cap. 7' in my case. The dealer had the part number and drop shipped the end cap pieces from GW. I had to trim them slightly to get the proper fit. May work for your boat, but GW may be able to send you dimensions and you could trim to fit.

 

[Determined]

Hey Bill,

Yes im looking for the bang plate END caps. the one thats in the picture. the dealer by me doesnt have any way to order and when i called grady they said they had no part number either.

But if that look like it and if you could tell me where you got yours that would be great!

Thanks.

 

[wspitler]

Looks exactly like mine. I ordered them through quality boats in Clearwater Florida. I will try to find the part number tomorrow but they were dropship directly.

 

[Determined]

Thanks Bill!

 

[mleads310]

 

[mleads310]

This is for a 2001 sailfish but may be the same for your boat

 

[mleads310]

part #21-350 (starboard side)

 

[wspitler]

Thanks Bill!

I looked through my invoices but could not find a part number for mine. They all seem to be very similar.

 

[DennisG01]

If you've talked directly with your local dealer and they couldn't help, try another one. Try Atlantic Marine. I've dealt with their service department a few times and they were always very helpful. You should be able to just call them and tell them your boat model/year - they can do the rest.

 

[PNWVoyager]

I have new bang plate molded end caps that I can sell you. I purchased them from a Grady dealer a month ago for I replaced my bang plate but decided not to use the molded end caps. Let me know if interested.

 

[Determined]

I have new bang plate molded end caps that I can sell you. I purchased them from a Grady dealer a month ago for I replaced my bang plate but decided not to use the molded end caps. Let me know if interested.

Yes absolutely! they look like the same ones?