Bennet m80

[Vlabruzzo]

I could buy a brand new set for 200 . The say 17-20 foot. I have a tournament 225. Would they be sufficient?
Thanks

 

[Doc Stressor]

I would say no. The stock tabs on my 226 are too short. I'd go with the next size larger if possible.

 

[seasick]

probably too small for that hull.
Also, the M80 kit runs about $460 and up depending on options. Are you looking at just the tab plates or the tabs, actuators, switch,pump and hoses?
It sounds too good to be true.

 

[DennisG01]

Get as much span as the space, and your pocket book, will allow.

 

[glacierbaze]

If you don't buy them PM me the contact.

 

[Vlabruzzo]

probably too small for that hull.
Also, the M80 kit runs about $460 and up depending on options. Are you looking at just the tab plates or the tabs, actuators, switch,pump and hoses?
It sounds too good to be true.

Its the entire kit

 

[seasick]

PM me also with the contact if you don't go that route. I still have my suspicions.
.

 

[Vlabruzzo]

PM me also with the contact if you don't go that route. I still have my suspicions.
.

Its a neighbor looking to get rid of them