Boat Lift Bunk spacing for Freedom 235

[proinvest40]

I have a freedom 235 on order which will be delivered in about 2 weeks. I need to get my boat lift set up properly for it. Can anyone let me know what the spacing should be for the bunks and if that measurement is from the inside or outside of the bunks? Thanks!

 

[seasick]

off of centerline, bunks are at 16 1/2 inches and 28 1/2 inches, so spacings can be 33 inches and/or 57 inches. For 33 inch spacing the hull will be 5 3/4 inches above the keel line and for the wider spacing, the hull will be just about 100 inches above the bottom of the keel
The center of load for a hull with the heaviest motors offered is 96.64 inches from transom.

One caveat: These specs are for 2020 models. I assume the newer models are the same but I have been wrong before ( and many more times than I care to admit)
In any case, Grady will send you the specs.