Cabin table

[CJ7Rob]

Want to add a small table I have out of a teak piece I have for my Overnighter. I want to make it removable and attach it to that partition by the head. Anyone know a 90* aluminum bend bracket that can attach to the partition and the other end to the bottom of the table? Thx

 

[DennisG01]

Man, Rob, I had to read that first sentence 3 times till I "believe" I understand what you are saying! So... you have a table (that may or may not be already made), and you want to use a 90* aluminum tube to mount it? Garelick makes at least one 90* setup.

 

[CJ7Rob]

Man, Rob, it I had to read that first sentence 3 times till I "believe" I understand what you are saying! So... you have a table (that may or may not be already made), and you want to use a 90* aluminum tube to mount it? Garelick makes at least one 90* setup.

Yes correct, thanks I saw the Garelick one and one by Taco, but pretty expensive.

 

[Fishtales]

Something like this maybe?
SeaLux Folding Brackets 12" Long Stainless Steel Shelf, Bench, Table Support 90 degree with Short release / Max. Bearing 330 lb (Sold as 2 pcs) (sealuxpro.com)

Lightweight version - may need some support.
90 Degree Folding Hinge Wear Resistance Concealed Cabinet Invisible Door Hinges Lightweight Hardware Fitting 165x28x21mm - Big Discount #730118 | Cicig

Some ideas here for the table top.
TOP OPTIONS | marinetablesinc

 

[DennisG01]

I like those SeaLux brackets... I might have to think of a project just to use them!

 

[Fishtales]

yes, hard to tell how they fold up and how they look. would be nice to see someone use them and report back...

 

[PointedRose]

I’d be interested in seeing pics of the final product. I also have an overnighter

 

[CJ7Rob]

Something like this maybe?
SeaLux Folding Brackets 12" Long Stainless Steel Shelf, Bench, Table Support 90 degree with Short release / Max. Bearing 330 lb (Sold as 2 pcs) (sealuxpro.com)

Lightweight version - may need some support.
90 Degree Folding Hinge Wear Resistance Concealed Cabinet Invisible Door Hinges Lightweight Hardware Fitting 165x28x21mm - Big Discount #730118 | Cicig

Some ideas here for the table top.
TOP OPTIONS | marinetablesinc

Thanks for sending these. First ones may work as long as I can make it removable. I have a teak table top maybe 24"x14", not big, just for kids to use in cabin.

 

[PointedRose]

Thanks for sending these. First ones may work as long as I can make it removable. I have a teak table top maybe 24"x14", not big, just for kids to use in cabin.

Could try just brackets like this but it wouldn’t fold, you’d take it off and stow

Improved Under Table Latch Assembly

Catalina Direct, publishers of the Catalina 22 and Catalina 25 Owner's Handbooks and the largest supplier of parts and Lewmar winches for Catalina Yachts in the country

www.catalinadirect.com

Table Leg With Bracket

Catalina Direct, publishers of the Catalina 22 and Catalina 25 Owner's Handbooks and the largest supplier of parts and Lewmar winches for Catalina Yachts in the country

www.catalinadirect.com

 

[ROBERTH]

I used the V-lock bracket as it is very small footprint and does not stick out more than 1".