Canvas work above front winshield

LaLa

Member
Joined
Jul 18, 2007
Messages
20
Reaction score
0
Points
0
Location
Long Point Bay, Ontario, Canada
I have a 248 Voyager and would like to make alterations to my canvas above the windscreen. Would it be possible for someone to send me pictures of their canvas work, more specifically I am looking to make alteration to my present canvas work (two large panels rather than zip out centres in each panel). I have to remove the entire panels to allow air to circulate in the cabin.

Thomas
 

ocnslr

GreatGrady Captain
Joined
Jan 31, 2005
Messages
1,907
Reaction score
43
Points
48
Location
Fort Myers Beach, FL
Model
Islander
LaLa said:
Would it be possible for someone to send me pictures of their canvas work.. Thomas

How about an email address.

I can send you photos that show how our custom enclosure is done.

Brian
 

ocnslr

GreatGrady Captain
Joined
Jan 31, 2005
Messages
1,907
Reaction score
43
Points
48
Location
Fort Myers Beach, FL
Model
Islander
See if these answer your questions:

DCP_0307.jpg


DCP_0283.jpg


Contact me if you want more info.

Brian
 

Grog

GreatGrady Captain
Joined
Sep 27, 2006
Messages
2,008
Reaction score
1
Points
38
Brian, just how many rod holders do you have on that boat?
 

ocnslr

GreatGrady Captain
Joined
Jan 31, 2005
Messages
1,907
Reaction score
43
Points
48
Location
Fort Myers Beach, FL
Model
Islander
Grog said:
Brian, just how many rod holders do you have on that boat?

Ten sets of Lee holders under the hardtop. You can see the two added closer to centerline after the photo above was taken, also the handrail that we added down the center in July 2006. With the two in the cabin, then I count 12 for ROD STORAGE HOLDERS.

IMG_3527.jpg


Now, as to ROD HOLDERS, we have five on each side of the boat, as shown here:


IMG_3533.jpg


Plus three in each gunwale, and one centerline in the transom. So there are 17 ROD HOLDERS on the boat.

Did I answer your question? :D
 

ocnslr

GreatGrady Captain
Joined
Jan 31, 2005
Messages
1,907
Reaction score
43
Points
48
Location
Fort Myers Beach, FL
Model
Islander
Don't want to derail the thread, but here is how "C-Time" looks in our slip at the condo where we live.

You can see all the rod holders, the riggers, center-rigger, dual antennas for the dual radios, etc. Our slip is at the end of the dock, and has the T-head on one side and a full-length finger pier on the other.

IMG_3532.jpg
 

BobP

GreatGrady Captain
Joined
Apr 27, 2005
Messages
4,744
Reaction score
6
Points
38
Location
Long Island, NY
Model
Sailfish
Nothing like a well equipped fishing boat!
Gradys are still (?) fishing boats

Brian, your forward canvas window are upside down !!
 

Grog

GreatGrady Captain
Joined
Sep 27, 2006
Messages
2,008
Reaction score
1
Points
38
What about the 2 in the bow?
 

ocnslr

GreatGrady Captain
Joined
Jan 31, 2005
Messages
1,907
Reaction score
43
Points
48
Location
Fort Myers Beach, FL
Model
Islander
Grog said:
What about the 2 in the bow?

WOW, how did I forget those.... usually used by Cathy. We have a drink holder insert that she puts in one holder, and still has one for her fishing rod...

Let's see, now the numbers are..... :D

Brian