Captain chair arms

g0tagrip

GreatGrady Captain
Joined
Mar 14, 2010
Messages
407
Reaction score
31
Points
28
Location
Indialantic
Guys, I have an 07 Marlin. Anyone found a solution to cleaning the soft part of the arms on the captains chairs? I have tried DEP commercial mold and stain remover, comet, and plain old soap and water to no avail. It looks like mold to me but if it was seems to me the DEP would have taken care of it. The DEP does clean up my bolsters like new.
Thanks for any possible solution.
 

River Rat

Active Member
Joined
Sep 27, 2013
Messages
42
Reaction score
0
Points
0
Age
64
Location
Upper Chesapeake Bay
Try "Roll Away" spray. We've always had good results with mildew. Follow with some 303 protectant.
Follow instructions for both
 

bayrat

GreatGrady Captain
Joined
Jun 19, 2010
Messages
277
Reaction score
0
Points
0
Location
long island, new york
g0tagrip said:
Guys, I have an 07 Marlin. Anyone found a solution to cleaning the soft part of the arms on the captains chairs? I have tried DEP commercial mold and stain remover, comet, and plain old soap and water to no avail. It looks like mold to me but if it was seems to me the DEP would have taken care of it. The DEP does clean up my bolsters like new.
Thanks for any possible solution.

It's not mold. I have the same thing on my 2010 and I read somewhere that it's a defect in the covering that Grady used over a period of time,and it just looks "dirty". The fix is supposedly a new type of "skin" that you can buy (not from Grady)and cover over it. I haven't bothered to do it so, unfortunately , I cant give you any good info. I'm sure that you will find that other's have this problem and maybe someone did the re covering and can give you more info.
 

IBeGrady'd

Active Member
Joined
Jul 12, 2012
Messages
42
Reaction score
0
Points
0
Same cosmetic problem here and, after unsuccessfully trying numerous restorative products, I purchased (via Grady dealer) the armrest covers. Only problem is that they look like an after-market "fix" (no texture whatsoever, plain vanilla) and I have yet to decide whether or not to secure them in place.
 

fireman_bob

Active Member
Joined
Jul 15, 2013
Messages
32
Reaction score
0
Points
6
I've had good luck using Duplicolor vinyl paint on my previous boat to restore the combing pads. I'm looking to restore the pads on my 02 282 Sailfish and found SEM makes a color in marine vinyl paint that's a pretty close match. It's called Sea Ray mystic white. For $20 or so (price with shipping), you may want to go this route before buying new pads.
From what I understand, SEM provides vinyl paint to most of the car OEM's for use at the factory to fix blemishes in the new cars seats.
 

g0tagrip

GreatGrady Captain
Joined
Mar 14, 2010
Messages
407
Reaction score
31
Points
28
Location
Indialantic
I sent Grady White customer service a request via their website. They recommended I try Magic Eraser. As soon as the weather clears up I will give that a try and give you a report. It is still raining here.
We are pretty flooded from the rain here in the Panhandle. It will screw up the fishing for a month.
 

bayrat

GreatGrady Captain
Joined
Jun 19, 2010
Messages
277
Reaction score
0
Points
0
Location
long island, new york
g0tagrip said:
I sent Grady White customer service a request via their website. They recommended I try Magic Eraser. As soon as the weather clears up I will give that a try and give you a report. It is still raining here.
We are pretty flooded from the rain here in the Panhandle. It will screw up the fishing for a month.

Good info..Ill give that a try ..I had actually thought about it a few times but kept forgetting to actually try it. I'm guessing that our fishing up here is bound to be a month later too. Water is still so cold after such a brutal winter.
 

bayrat

GreatGrady Captain
Joined
Jun 19, 2010
Messages
277
Reaction score
0
Points
0
Location
long island, new york
bayrat said:
g0tagrip said:
I sent Grady White customer service a request via their website. They recommended I try Magic Eraser. As soon as the weather clears up I will give that a try and give you a report. It is still raining here.
We are pretty flooded from the rain here in the Panhandle. It will screw up the fishing for a month.

Good info..Ill give that a try ..I had actually thought about it a few times but kept forgetting to actually try it. I'm guessing that our fishing up here is bound to be a month later too. Water is still so cold after such a brutal winter.

Just tried it and it worked GREAT ! I had a new eraser and after doing 2 1/2 arms it had disintegrated because you really have to scrub (so count on using 2 erasers). Going to add 303 protectorant now. Someone said it has been caused by sweat/ suntan lotion, but who knows. Thanks again for doing the legwork.
 

IBeGrady'd

Active Member
Joined
Jul 12, 2012
Messages
42
Reaction score
0
Points
0
bayrat said:
Just tried it and it worked GREAT ! I

Congrats! Thanks for the heads-up and I'll be giving it a try fersure.

Any chance for a close-up pic of your restored armrests?
 

ttles714

Well-Known Member
Joined
Jun 6, 2009
Messages
214
Reaction score
16
Points
18
Location
NJ
I removed mine and soaked them overnight in a solution of bleach and water. about 1 gal of bleach to 3 gal of water mixed in a 5 gal bucket. they came out almost like new... let them dry and seal them with wax
 

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,031
Reaction score
1,286
Points
113
I wish someone would make fabric covers to go over them like ice hockey blade covers.
 

Angler Management

GreatGrady Captain
Joined
Jun 15, 2014
Messages
302
Reaction score
25
Points
28
Location
Washington State
Model
Marlin
I have used Magic Eraser on prior boats with great success, in fact I bought a box two weeks ago in anticipation of the same thing.

Mine are pretty grungy though, may try the bucket of bleach idea first.