Carrying a dinghy on a marlin ?

PNWMarlin28

New Member
Joined
Apr 7, 2019
Messages
3
Reaction score
0
Points
1
Age
63
Model
Marlin
i'm trying to figure out how I can carry a dinghy on my marlin. Top seems obvious but there's lots of antennas, radar, etc. up there... do I just need to relocate them or is there another option someone has used ?
 

Buffalo Btms

Active Member
Joined
Feb 12, 2019
Messages
36
Reaction score
17
Points
8
Age
56
Model
Marlin
Working on machining a bracket for two rod holder bases on one side that will carry two kayaks or two mountain bikes. Dinghy likely too wide for that sort of bracket.

Hate asking this, but here goes, what is the size of your dinghy? :/

Is it possible to secure upfront on the bow?
 

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,031
Reaction score
1,286
Points
113
pia. I went with the smallest rollup I could find and an early 1970s 4ph 2 stroke ob. stored up front when traveling. I also inflate in the boat and toss overboard for long trips. either way or on hardtop it isn't easy.
 
  • Like
Reactions: DaveHempstead

PNWMarlin28

New Member
Joined
Apr 7, 2019
Messages
3
Reaction score
0
Points
1
Age
63
Model
Marlin
thanks guys. don't actually have the dinghy yet but thinking i'd like something that would hold 3-4 (two adults/two kids) .
was wondering if i'd have to inflate it instead of carrying it inflated.
 

fsc60

Well-Known Member
Joined
Apr 21, 2008
Messages
134
Reaction score
39
Points
28
Location
branford ct
Model
Express 330
Heres what I did
Came out great
Then I Bought an Express
Still have the brackets
 

Attachments

  • IMG_4866.JPG
    IMG_4866.JPG
    1.4 MB · Views: 154
  • IMG_4870.JPG
    IMG_4870.JPG
    1.1 MB · Views: 143
  • IMG_4871.JPG
    IMG_4871.JPG
    1.2 MB · Views: 147
  • IMG_4875.JPG
    IMG_4875.JPG
    1.1 MB · Views: 142
  • IMG_4900.JPG
    IMG_4900.JPG
    2.3 MB · Views: 147

hinmo

Well-Known Member
Joined
Sep 2, 2006
Messages
150
Reaction score
15
Points
18
Great Question....I have been wondering the same. I suppose a rollup stored in the cockpit or on the bow might be ok (with a small OB). Anyone tow a rollup? looks treacherous
 

drbatts

Well-Known Member
Joined
Nov 30, 2008
Messages
887
Reaction score
190
Points
43
Location
CT
Model
Express 305
I have been toying with the same issues and options on my 305. I think a bracket on top of the stern fish box is probably the best way to go. I used a small roll up on my 265 which I would inflate and deflate which was a PIA. I did tow it once at 25 knts (empty) I used the setup and rope you would for a tube, and it actually tracked well behind the boat. Will a small inflatable fit in the walkway to the bow on a marlin? I have seen this done on other boats.
 

GradyChris

Active Member
Joined
Aug 28, 2018
Messages
39
Reaction score
3
Points
8
Location
Seacoast NH
Model
Sailfish
I just bought a inflatable roll up dinghy for my 272 Sailfish...the plan is to really only use it when we are somewhere without launch service or at a dock.
I'm actually testing it out tonight in the yard to see how easy it is to inflate/deflate (I did buy a rechargeable battery pump to help with this)

We are on a 315 mile cruise starting next wknd so likely plan to keep it up on the deck (in the bag) when underway (if not in the aft cabin)
I don't think it is something I would attempt to tow at cruise speed for fear of it getting swamped or filling up with water
 

Comfortably Numb

Well-Known Member
Joined
Dec 5, 2005
Messages
106
Reaction score
3
Points
18
Location
Southwest Florida
I just purchased a Zodiac Cadet 230 Aero (high pressure air floor) and Yamaha F2.5. They both store neatly (including oars, aluminum seat, and air pump) inside a Yeti 350 that I keep on the deck of my Express 330.

I have not had a chance to use the inflatable yet, so I do not know how difficult it will be to inflate or deflate, roll and store again, but it's a very neat and tidy way to store the boat so far. The Yeti also has a padlock to lock it closed, and I can lock the cooler to the gunwale of the Grady when I am away from the boat.

Since the Yeti weighs 89 lbs empty, the boat, motor and cooler combined have to weigh close to 240 lbs, so locking it to the gunwale is probably unnecessary.
 

Attachments

  • IMG_8119.jpg
    IMG_8119.jpg
    387.8 KB · Views: 59
  • IMG_8120.jpg
    IMG_8120.jpg
    395 KB · Views: 54
  • IMG_8121.jpg
    IMG_8121.jpg
    344.6 KB · Views: 51
  • IMG_8122.jpg
    IMG_8122.jpg
    510.2 KB · Views: 56
  • Like
Reactions: Chutch and Zebulon

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,031
Reaction score
1,286
Points
113
even the small rollups are a pia. you have to inflate and then toss overboard. then pass the engine and all the gear. just not worth it if you ask me. the boat is too small to keep it on inflated, hardtop not made to handle it. I guess up front but then your view is impacted.
 

Comfortably Numb

Well-Known Member
Joined
Dec 5, 2005
Messages
106
Reaction score
3
Points
18
Location
Southwest Florida
I bought the boat to use when anchoring overnight in a mooring field, or to power up to a restaurant dock that cannot accommodate a larger boat


This boat weighs just 53lbs. The aft portion of the hardtop should have no problem supporting it, if I turn it upside down and tie it down sideways. If not, then I’ll have to throw it in the cockpit or deflate and store it back in the yeti
 
Last edited:

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,031
Reaction score
1,286
Points
113
I thought that too until I did it a dozen times. Gets old fast.
 

lahillier

New Member
Joined
Aug 23, 2021
Messages
1
Reaction score
0
Points
1
Age
39
Model
Marlin
I can see that being the case, but I have a specific trip in mind where a dinghy is essential.
If it’s that big a PITA, then I’ll list it on Craigslist after the trip
Did you end up keeping it? I’m looking at the similar Zodiac.
 

DaveHempstead

New Member
Joined
May 5, 2023
Messages
1
Reaction score
0
Points
1
Age
67
Model
Freedom 235
I may have a solution for carrying my dinghy on my 235. The dinghy is small (8 feet) and has no motor, but meets my needs. I used 1" PVC pipe, going into the rod holders, and resting on the rear cleats.
(since I took the first picture, I added a 2nd cross pipe sitting on the storage bins, just to provide extra support)


20230714_153400.jpg20230717_135344.jpg
 

loubeer

GreatGrady Captain
Joined
Sep 6, 2017
Messages
204
Reaction score
75
Points
28
Location
Newport Beach, CA
Model
Express 330
I agree that a roll-up is a pain in the ass, but it seems that all options on smaller boats are a PITA. I did the following for both my Marlin and then my 330. I purchased an 8'8" Achilles LSI in 2002 (minimal use and still going strong), featuring a high-pressure floor and air keel - very happy with the performance and weight saving. Two adults and two kids OK for short jaunts to shore. I transport the dinghy in a cockpit corner. I have a stern mount on my transom for a Yamaha 4hp four stroke. I take a 110 volt inflator and top off the pressures with the foot pump. When I take the family to Catalina, we inflate the dinghy on the stern top deck, toss it in the water and then mount the outboard - about 30 to 40 minutes. It takes two adults to best accomplish this, but they're with me anyway. Reverse process when leaving, but deflation goes much quicker. Over the years, I've got it down and it's well worth the effort. All the adults, kids and grandkids have and still enjoy dinghy adventures.
 
  • Like
Reactions: Chutch